90W Soldering Iron Kit (13 in 1 Soldering Iron Kit)

Key Features

• Fast Heating and Adjustable Temperature: The 90W ceramic heater is ready for soldering in about 20 seconds; heat-up time may vary by setting and conditions. Adjust the iron from 180°C to 480°C (356°F to 896°F), and view the set temperature on the LCD. With the iron on, press and hold the plus and minus buttons together to switch between °C and °F; the unit selection is saved after 3 seconds. Suitable for circuit boards, wire soldering, small electronics, appliance repair, and DIY projects.
• Temperature Calibration, Memory and 15-Minute Auto Sleep: The sensor helps regulate heating and supports a calibration offset of -99°C to +99°C. The soldering iron saves the last set temperature for the next use. If the iron remains powered on without use for 15 minutes, it enters sleep mode to limit unnecessary heating; the LCD shows three dashes (---), and heating stops. Press any button to resume heating. The tip remains hot while cooling, so place the iron in the heat-resistant stand.
• Ergonomic Handle and 6 Soldering Tips: The heat-resistant, non-slip silicone handle supports a comfortable grip during soldering. The soldering iron has 1 pre-installed 900M tip and 5 additional 900M tips in the package, for 6 tips total. Different tip shapes suit various components and solder joint sizes. Inspect and replace worn, oxidized, or damaged tips. If replacements are needed, use compatible 900M tips. Unplug the soldering iron and let it cool completely before tip changes or storage.
• Soldering Kit with Carrying Case: Includes a 90W digital soldering iron with 1 pre-installed 900M tip and 5 additional 900M tips, for 6 tips total. Also includes solder wire, solder wick, desoldering pump, anti-static tweezers, wire stripper, soldering iron stand, and PU carrying case. The carrying case holds the tools for storage and transport. Unplug the soldering iron and let the tip and metal parts cool completely before placing the iron in the case. Store the tools in a clean, dry place.
• Electronics Repair and Stand Use: For printed circuit board repair, small electronics repair, wire soldering, small appliance repair, craft and DIY projects. Place the soldering iron stand on a flat, stable, heat-resistant surface. Position the power cord so it does not pull on the soldering iron or cause the iron or stand to shift. During pauses, return the iron to the stand. If the cord moves or twists, check that the iron remains properly seated. The tip and metal parts remain hot.

Specifications

Description