14.9 Inch Dimmable LED Flush Mount Ceiling Light
14.9 Inch Dimmable LED Flush Mount Ceiling Light
Key Features
- 5CCT Selectable
Specifications
| Brand | ROVEXO |
| Manufacturer | ROVEXO |
| Product Type | LIGHT_FIXTURE |
| Item Type Keyword | close-to-ceiling-light-fixtures |
Couldn't load pickup availability

- 5 stars: 6 (75%)
- 4 stars: 1 (13%)
- 3 stars: 1 (13%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
[Color: White, Size: 8.7"-6Pack]
This review is for the 8.7 Inch LED Flush Mount Ceiling Light, 16W Dimmable & 5CCT 3000K-6500K | 0.66; Ultra-Thin Round Ceiling Lights Fixture, Bright Low-Profile Lighting for Bedroom, Kitchen, White 6-Pack (White-6Pack). I used these to replace hanging light fixtures in my basement. It was easy to replace and they work well. It is nice that they are low profile as I have a couple fixtures that were above some shelving. This gives me just a bit more room and don't really have to worry about bumping them. The light is nice and bright, and it is easy to change the color temperature so you can see what you prefer. I like the cooler temp as it is in the basement but would be easy to change it to warm if my tastes ever change. I do not have it on a dimmable switch so I can't comment on how well it works with that. A motion detection switch would be a nice touch though so it would turn on automatically when I enter the basement. These are a nice value for the money and I would recommend them. They give the look of pot lights without the hassle of trying to install pot lights.
[Color: Black, Size: 11.4"-6Pack]
Having this available as a 6-pack has been so useful to have the same type of lighting throughout my space. This light to me is very modern, timeless, and keeps the design element as something that's not extremely prominent, but has lighting just nicely placed with these all matching where they are slim and not bulky, not too large or too overbearing or bold. The lights all through the space are calm and useful, perfectly spaced throughout and the match looks very nice, very intentional and lavish. These were easy to install and each took less than 10 minutes to put in for each light. I love the lighting these provide.
[Color: Black, Size: 8.7"-6Pack]
Muy buenos
[Color: White, Size: 15"-4Pack, Color: White, Size: 15"-4Pack]
These flush-mount fixtures have a nice, even light that can be set to any of five different color temperatures. They were easy as pie to install where the original can lights used to go. The larger diameter of these fixtures fully covered the old house and the circuit already had a dimmer on it.The lights have been up for almost two months and they work perfectly. It looks like a cinch that these will be working up there for years to come. (if they don't, I'll come back and edit this.). The thin, low-profile design makes them look like they were part of the original design.They have a nice, neutral wire color to the very limited amount of exposed surface seen now that they are installed. I find them to be attractive and like how the room looks with these set to slightly less warm color than the rest fo the more exposed lifting in the room. It created a kind of spotlight effect.In my opine these are a good value as a set of four. I would likely get more of these exact ones if I had need.
[Color: White, Size: 11.4"-6Pack, Color: White, Size: 11.4"-6Pack]
The house I moved into had a lot of super old, power-hungry lights and it just looked terrible. After getting my hands on a couple of these ceiling mounted lights and putting them up I realized pretty quickly that I needed more, and would also want a couple of spared in case of a burn out.Finding a six pack at a super reasonable price really made my day. The quality of the lights is great, and being able to easily adjust the color temperature to match the other lights in the house really lets me set the mood of my rooms how I want it to be set.Installation is super simple, a couple of screws into the existing box to hang the provided mount, clip the hook on so you don't need to hold on to the light while connecting the two wires, wire it up, and twist it onto the mount, that's it, all done.The lights are bright and don't have any of the flickering and taking a few seconds to turn on when the switch is flipped that you see with other LED fixtures.My whole house is filled with warm light, and it only took me an hour to do it, absolutely love these lights.
[Color: White, Size: 8.7"-6Pack]
Product was easy to install and lit well on all brightness levels, however it buzzes unless I keep it a max brightness…This could be related to the specific dimmer switch I choose, however I suspect it’s just the light.
[Color: Black, Size: 11.4"-6Pack, Color: Black, Size: 11.4"-6Pack]
ETL listed 11.4 inch flush mount ceiling light, or more accurately, semi-flush... it was a little hard to get it on a photo, but the plastic base is warped a little pushing one side of the light away from the ceiling a full 1/8 inch. And that is new out of the box, the entire mounting base and center ring is plastic, so with gravity and heat generated from the light, I expect it to get worse with age. It is a lightweight item, so i don’t expect it to fall off.On the plus side it is ETL listed... ETL and UL both test to the same standards, and it rates high in my book if a product can meet basic performance and safety requirements!Also adjustable on the color temperature from 3000K-6500K, personally, I prefer a 2700K-5000K range, as I don't use the high end of the spectrum, but may use the 2700, versus the 3000K much more likely than more choices at the high end. But that's just me, your preferences will differ.Installation is rather straightforward, connect the two wires, the hot and neutral, screw on the bracket and located the wire and connectors up inside the junction box as there is no room below the junction box for them, set the preferred color temperature and twist to lock the light into place.Dimmable, rated to a low of 5%, that may vary with your dimmer switch, on my switch it dimmed great and I would suggest it went down to 1%. No detectable flickering or buzzing.The product is rated at 22W and 2400 lumens, I don't have a way of measuring either, but the 100 lumen per watt is a fairly standard performance level.The CRI (color rendering index) of 85+ is fair. (Or CRI of 80 depending where on the product page you look). Many of the better LEDs have CRI of 90- 97 ratings.Price is fair... If you are okay with the slightly low CRI rating and a poor quality plastic housing, this is your product!
[Color: White, Size: 11.4"-6Pack, Color: White, Size: 11.4"-6Pack]
I installed this 6-pack of 11.4-inch LED flush mount lights to replace several aging, builder grade fixtures around my home. They are a functional upgrade for the spaces I chose. If you are looking for a simple, modern aesthetic without the bulk of traditional dome lights, these fit the bill perfectly.The best feature is the low profile design. Because they are so thin, they sit essentially flush against the ceiling, which makes them disappear into the room until you turn them on. This has made a noticeable difference in my hallways and smaller utility rooms, where I previously felt the older fixtures were making the ceiling feel lower than it actually was. The light output is also very impressive. Even with the smaller diameter, they cast a bright, even glow that has significantly improved visibility for tasks in the pantry and laundry area.However, while the selectable color temperature feature is a great feature allowing me to chose the right ambiance for multiple spaces, the implementation is a bit cumbersome. You have to remove the light fixture from the mounting bracket to access the toggle switch on the back. Also, I noticed that the color accuracy isn't perfect across the entire range. The cooler settings tend to lean slightly toward a greenish tint, and the warmest setting feels a bit lower in temperature than the indicated rating.Installation is very simple if you are comfortable with basic electrical work. I especially like the hanging strap that holds the fixture up while you are attaching the wires, but the housing is very compact. The mounting bracket is made of durable plastic, and the space between the fixture and the ceiling is tight. If your electrical box is already crowded with wires, you will have a limited amount of room to tuck everything away. If you are surface mounting, you will likely need to use low profile wire connectors, as standard wire nuts might be too bulky to fit properly behind the light.Despite these practical quirks, this set is an excellent value for anyone needing to replace multiple outdated fixtures at once. They provide consistent, modern illumination and a clean look that is difficult to beat at this price as long as you take the time to test your preferred color temperature before finalizing the installation, they are an effective way to refresh your home’s lighting.