Contouring Roof Reinforcement Fabric

[Size: 40 In x 200ft, Size: 40 In x 200ft]
We used this product to help us seal an area that was leaking on our travel trailer. The fabric was easy to mark and cut to size. Application is pretty straightforward. Just follow the directions. The fabric was easy to work with and easy to place it exactly where we needed it. It took the sealant well and remained firmly in place after the sealant application.

[Size: 40 In x 200ft]
This roof fabric is a good product for building up and reinforcing a sheet metal roof that is starting to rust and get pin holes. Mop out a base layer of your choice of roofing, asphalt-acrylic-silicon, and while it's still wet embed a layer of fabric in it and let it dry. Then put a top coat of roof sealant over the fabric layer. This will close up those gaps and pinholes and make the roofing less likely to curl up and peel in litle patches as it ages. It's a good product and a solid choice to extend the lifespan of a metal roof that may be old and weak. I think its a great value.Success is 90% preparation, you need to SCRUB and loose, flaking, rusty, or powder off the roof. Seal any rust spots to stop the rust from spreading. Then once the roof is clean enough to eat off of, you can begin the layering process.

[Size: 40 In x 200ft]
Great product. Easy to use. Nice material.

[Size: 40 In x 200ft]
This reinforcement fabric has been easy to work with from the start. Whether using scissors or a utility knife, it cuts cleanly without fraying, which makes measuring and fitting much less frustrating than I expected.I was also impressed with how flexible it is. It wraps around corners and contours nicely without fighting you. Although the roll has a bit of curl when you first unroll it, the fabric relaxes and lays flatter fairly quickly, making it easier to position before applying your roofing coating or sealant.The material feels durable while still being easy to handle, and the generous 40-inch width means you can cover larger areas with fewer seams, which is always a plus.Overall, my first impression is that this is a quality roofing reinforcement fabric that's easy to cut, easy to work with, and well suited for reinforcing roof repairs and coatings. Based on my experience handling and fitting it, I'd definitely recommend it for anyone tackling a roofing project.

[Size: 40 In x 200ft]
This started out as for only a repair fabric for reinforcing a large roof vent entrance in our shop, and became used for an entire area support. I was so impressed on how this fabric responded when I embedded this in the mastic around the 3'x3' roof bent entrance for the fresh air intake fan, that I used it to further support a step-down roof area and the transition area between. This fabric is very strong, fibrous content that holds steady any area that you embed it in. With out old built-up style roof, it seems we are always chasing leaks due to roof cracking and movements, this fabric has seemingly done fantastic to hold the roof steady and ultimately dry. The roll comes out easily, is easy to position, and then depending on your type of application, goes in solid and stays. I am definitely a fan and will use this as reinforcement when we switch to a PVC membrane roof as underlayment support.

[Size: 40 In x 200ft, Size: 40 In x 200ft]
I have been working on fixing up an older wooden storage shed in our backyard that had developed a few stubborn leaks over the winter. I wanted to apply a thick elastomeric roof coating, but I knew I needed to reinforce the seams between the plywood panels first so they would not crack again in the heat. I got this large roll of polyester fabric to bed into the sealant.The fabric is surprisingly soft and contours easily around the edges of the roof line without bunching up. It absorbs the liquid roof patch perfectly, creating a really solid reinforced membrane once everything dries. Working with long strips of this material can get messy quickly. My best advice is to only lay down a few feet of your base coating at a time, press the fabric in smoothly to remove air bubbles, and then apply your top coat.It has held up nicely through a few heavy Florida rainstorms now, and the shed is completely dry inside. Getting two hundred feet on a single roll is an excellent value for a large waterproofing project. I would absolutely use this material again for future roof maintenance.

[Size: 40 In x 200ft, Size: 40 In x 200ft]
I've a century home with an addition put on somewhere between the 30s-50s that had the original seamed cold tar bitumen metal roof that after a tough winter is definitely in need of restoration and some areas will definitely need reinforcement.This massive roll of woven contouring polyester roof reinforcement fabric is going to work perfectly, didn't cost an arm and a leg, and will give my old and tired roof a brand new life, while meeting all requirements of my local historical district.