Undermount Soft Close Drawer Slides with Rear Mount Brackets

[Size: 21 Inches, Number of Items: 1, Size: 21 Inches, Number of Items: 1]
These undermount drawer slides are really nice!They feel strong and sturdy, and the soft close action is very smooth and quiet. They feel quite capable of supporting 100lbs as described. I believe they would function quite well supporting items such as larger kitchen appliances like crockpots and InstantPots, etc, which are nice to be able to put away out of sight when not in use.The instructions could have possibly been made a bit more simple for folks who haven’t done a lot of DIY projects, but they aren’t awful, and installation is really pretty straightforward and enhanced by the 3D adjustability. The little level included in the package is a nice touch, if you don’t happen to have one.These are priced fairly competitively within the average market range, and I would use them again.

[Size: 21 Inches, Number of Items: 1, Size: 21 Inches, Number of Items: 1]
These drawer slides are seriously heavy duty and whisper-quiet in operation. They come absolutely slathered in grease, with enough extra lubricant to make a KFC bucket jealous. The result is a very smooth, substantial-feeling slide.The soft-close action is also better than some I've used. The catch isn't nearly as aggressive as certain soft-close mechanisms, so the drawer doesn't feel like it's getting yanked shut for its own good.The 100-lb capacity is particularly appealing for my use. I have some heavier small appliances stored in a cabinet that are currently a pain to reach, and these should make pulling them out and accessing them much easier.The only real annoyance is that the measurements and installation specifications are presented in metric. That's not a dealbreaker, but it does mean some conversion and careful measuring before installation. For these, I'll make it work.Pros:Seriously heavy-duty construction100-lb load ratingVery smooth and quietFull extensionSoft-close action isn't overly aggressive3D adjustmentIncludes mounting hardware and bracketsCons:Installation measurements are metricSubstantial construction means installation needs careful measuringBottom line: These feel like they're built to carry some serious weight without sounding or feeling like industrial hardware. For heavy drawers and cabinets where access matters, they're a very compelling upgrade.

[Size: 21 Inches, Number of Items: 1, Size: 21 Inches, Number of Items: 1]
These are heavy-duty slides that operate smoothly and work well. At $35.99 they are a little higher priced than another set that I ordered that is the same size. The other set was $6 less but had plastic pieces on one end of each slide. Other than the plastic piece, they seemed to operate the same. I have installed many drawer slides, but they have always been the side-mount slides. This is the first undermount slide, so I was looking through the instructions. There are no screw holes to attach the slide to your drawer, like on the side mount slides, so I was trying to see exactly how they attach. The instructions weren't clear, but I now see that the little hooked piece of the drawer slides holds the rear of the drawer, and the two pieces with levers screw in under the front of your drawer and snap in to the slides. If you have ever installed a side mount slide, when you release the drawer to remove it, the piece of the slide that is mounted to the drawer slides out with the drawer. These do not work that way. On these, all of the slide stays, and only the little attachment piece with the lever comes out with the drawer. I am a carpenter and can usually figure out things like this, but if you have not done this before, you may struggle if you are relying on the instructions to figure it out. Overall, they are nice slides and not a bad value, but you may be able to show around and find a comparable slide for a little less. One other thing to note about the two different slides is that the cheaper slide was missing the attachment pieces with levers, screws, and anything else that should have been in the package. It was only the slides themselves that I received. At least with these, everything was there when they arrived.

[Size: 21 Inches, Number of Items: 1, Size: 21 Inches, Number of Items: 1]
These are some solid soft close drawer slides that have a unique under mount type of mounting application. This is the first I’ve come across drawer slides like this but they install relatively easy.When fully extended it has a robust 3 piece design that splits the full extension length into 3 sections instead of 2 like other drawer slides, giving you a stronger support overall. There is also a tiny gas piston located on each that provides the soft close mechanism. The quick release brackets are nice, no messing with re-aligning the slides when removing a drawer like with traditional slides.They come with all necessary hardware to install and instructions. I didn’t use these for actual drawers, but instead for a sliding mount platform inside of a cabinet, to move my spindle sander in an out of it easier. Same principle attached the same way you would to a drawer, just without the drawer carcass.The L brackets they give you are for the spacing in the rear. The other brackets with the quick release buttons are what you’ll mount to your actual drawer/face underneath. It’s definitely a different design but worked well for what I needed them for.Shipping was fast and they arrived in perfect condition. They’re packaged well in a tight fitting box, inside the Amazon box for extra protection.I feel they’re fairly priced for the quality of the mechanism and how well built they are as a whole. It definitely takes some time to figure out if this is your first time installing these, but it was worth it. 5 stars, I would definitely recommend.

[Size: 21 Inches, Number of Items: 1]
This is a nice set of drawer runners. The undermount type was made popular few years backbit Blum and the industry soon followed. Installing these, it is obvious why they are so popular.They are easier to install, easy to remove (the drawer, not necessarily the runners...) and they are capable of being adjusted forward/back, left/right and up and down, so if the runners are slightly askew, from the holes being mis-drilled or the cabinet carcass having settled, the misalignment may be compensated for.These runners are also tough, with a weight capacity of 100 pounds, in its fully extended state.If you are making furniture with drawers, you likely already know how good these are, if so, here is another source. If you are replacing or upgrading a drawer, you really need to try these. I promise, you'll never want to use another type again. Well, unless something new and improved comes along, for now, these are the bees knees.

[Size: 21 Inches, Number of Items: 1, Size: 21 Inches, Number of Items: 1]
Heavy duty bottom mount drawer slides. This thing boasts a 100 lb rating, that should be sufficient for nearly all kitchen cabinet needs, plus a variety of other heavy duty uses. This slides smoothly.Soft close, rear mount or side mount on the cabinet, most of the drawer slides I’ve purchased did not include the rear mounting bracket. Full extension for easy access to the entire drawer. There is 3 adjustment screws on the mounting plate of the drawer to fine tune the fit of the drawer front to the frame.This thing is heavy duty and comes with all the bells and whistles of soft close, full extension, undermount, and a fair price.Recommended buy

[Size: 12 Inch, Number of Items: 1]
These undermount sliders are meant for heavy duty drawer that would get use a lot, or just for regular everyday use. I have used these types of sliders before when I installed it for my garbage bin drawer, and really like the locking feature.So for my DIY project, I used these undermount sliders to mount a 35" keyboard tray so that I have more space to work with under my desk. These undermount sliders are much studier and stronger than the regular vertical sliders because it doesn't warp under pressure or when pulling it constantly since there are no wheels to worry about, and all the pressure is on the rail sliders.A 35" keyboard tray requires these undermount silders for stability. So if you are using these sliders for your kitchen drawers, you will have no worry about the durability of these sliders since they are just two solid metal rails gliding over each other.These sliders are much smoother, and the soft-close lock feature works well for drawers, or in this case, a keyboard tray when pushed in. These lock holders require a bit of effort to pull out, which is great to ensure it doesn't slide out.Overall, I'm happy with them. They feel sturdy, look clean, and the soft-close feature is a nice improvement over standard drawer sliders.These undermount sliders are great for standard drawer, garbage bin drawer, and even for customized keyboard tray. It works really great in the RV as well due to the lock feature.