10 3AWG Black

[Size: 15 FT, Size: 15 FT]
This 10 AWG THHN 3-conductor wire has quality copper and insulation. It is nice and flexible, which makes it easier to work with during installation. The stranded copper and nylon jacket feel well made for 600V indoor or outdoor use. Good length and construction. Happy with the quality of this wire.

[Size: 50 FT]
Needed wire, bought and used the wire. Would absolutely do it again!

[Size: 10 FT]
Flexible copper strands in what is a 10/2 equivalent of THHN/THHW with quality sheathing. (For those unfamiliar, THHW is used in locations where there may be moisture such as garages). The ground is full sized (10 AWG) matching the current carrying wires. I used these for adding a new outlet in the garage from an unused breaker. It has been up-and-running for over a month now, I have no complaint. I easily got them run though a short run of conduit and to an outlet and a breaker. Easily strips and flexes to fit where you need it.

[Size: 50 FT]
The clear sleeve makes it easy to pull through conduit

[Size: 10 FT, Size: 10 FT]
This is a nicely made up THHN cable set with a clear thermoplastic overwrap that keeps long pulls of this cable from snagging. It is an orderly arrangement of a hot, a neutral, and an insulated ground. The stranded copper is easy to pull in a rated conduit or tubing. The inner insulation strips with the same challenge as any other THHN jackets. What I did notice in the length I worked with was an absence of a running marker on the conductors, nothing is imprinted in this sample to show it is in fact THHN. My experience says that it is, but in a permit with inspection install, an inspector may not accept wiring without running markings. To be clear, it is a good quality cable and made up cleanly. If you are doing a lot of pulls on your own, this is a value-add to your process as you do not need to nurse three spools to deploy and risk snags. This can deploy from a single box directly to raceway / tubing / conduit without kinking onto itself or snagging and pull freely with the very smooth outer bundling jacket.

[Size: 10 FT]
I bought this 10-foot run of 10 AWG THHN wire for a quick project, and it is excellent quality. Finding short, pre-cut lengths of heavy-gauge wire can be tough, so this 10 FT option is a fantastic value.The stranded copper is highly flexible, making it much easier to pull through conduit and bend into electrical boxes than stiff solid wire. The traditional black, white, and green color coding is clear, and the slick nylon jacket helps it glide smoothly without snagging. With its dual THHN/THWN-2 600V rating, it is tough enough for both indoor and outdoor jobs.It arrived cleanly coiled with no kinks. Highly recommended if you need a reliable, professional-grade wire without buying a giant, expensive spool!

[Size: 10 FT, Size: 10 FT]
This product looks, acts, and is packaged identically to another vendor's product that I have used. This review will be the same, almost verbatim. Note that this doesn't reflect one way or another on what I think of the product, itself. It seems like a good product that is simply being marketed under different names.This stranded wire comes twisted with a thin wrap, making pulling all three wires a simple task. I got only the 10-foot package, good for a short raceway run or cutting up for small tasks. I like the fact that it came in a sturdy zip-lock bag for keeping the leftover coil contained. The quality seems on par with other wire I have bought from different sources. In retrospect, I'm not sure there was any advantage in getting this instead of just using on-hand NM cable. The flexibility is better than the solid-core wire I have on hand, making better use of box space, but ironically, the NM sheath is easier to cut away without damaging individual wire insulators than the wrap on this cable. Also, there's no cost benefit in using this, instead (it's not cheap), so I don't see any more value in using this. Don't get me wrong; it's a good cable as long as it fits your needs, application-wise and budget-wise.

[Size: 10 FT]
This is a very nice length of 10 AWG, three-conductor wire consisting of black, white, and green stranded copper conductors. The individual conductor colors make it easy to identify hot, neutral, and ground connections without needing to apply additional tape or labels.The stranded copper conductors are flexible enough to route through enclosures, conduit, panels, and other relatively tight areas, while still feeling substantial and durable. The insulation appears thick, consistent, and well manufactured. Each conductor is THHN/THWN-2 rated for up to 600 volts, making the wire suitable for a wide range of indoor and outdoor electrical applications when installed according to the applicable electrical codes.I especially appreciate that this uses actual copper conductors rather than copper-clad aluminum. For higher-current wiring, dependable conductivity and secure terminal connections are extremely important. The strands strip cleanly, twist together well, and fit securely into properly sized terminals and connectors.The included black, white, and green conductors are particularly convenient for projects requiring a complete hot, neutral, and equipment-grounding conductor set. The 10-foot length is also useful for smaller installations and repairs because you receive enough wire for a practical project without having to purchase three separate full-size rolls.Overall, this is good-quality, versatile 10 AWG stranded copper wire with clearly identified conductors and durable insulation. It worked exactly as expected and is a product I would confidently purchase again for an appropriate electrical project.