Brushless Cordless Detail Belt Sander Compatible with Milwaukee M18

[Color: Red]
Honestly I can say I'm truly surprised at how well this belt sander works!, it's easy to change the angle and easy to change out the belts, brushless motor so it's very powerful, easy to change the speed and also the light works really well in it, I would 100% recommend

[Color: Red, Color: Red]
We have a wood working bench. This sander is awesome! We used it to sand furniture edges and corner detailing. It will also be used for rust removal. We own some pieces of furniture that are hard to sand and this will get the job done. It’ll also be excellent for rust removal. It has a powerful motor and 6 speed adjustment settings. It’s lightweight and it feels durable. It’s a versatile tool to add to a tool collection.

[Color: Red]
Didn’t completely eliminate the use of a file, but came in great handy and found many other uses for it

[Color: Red]
Works great very happy I bought it

During a recent update to the trim in my hallway I needed something that could handle the corners where the baseboards meet at the door frames. This cordless detail belt sander fit right into those spots and let me smooth the filler I had applied without having to work around a cord or a bulky body. I used the pivoting arm to angle the belt into the ninety degree turns and the variable speeds let me start aggressive on the filler and then go easy as I blended it into the wood. The slim shape meant I could keep my hand close to the wall and still have good control over the pressure. I worked my way along the whole run of baseboard and the corners came out looking clean and ready for paint.On the longer stretches of baseboard I kept the arm straight and used a steady medium speed to level out any uneven spots from the installation. It tracked straight and did not wander even when I moved at a decent pace along the wall. The cordless part was especially convenient because I could set up a couple of the longer pieces on sawhorses in the middle of the room and sand them without looking for power. My back did not get sore from hunching over because I could stand normally and move the tool along instead of fighting with cords and larger equipment. When I stepped back and looked at the finished trim the lines were straight and the corners had no visible gaps or rough areas. It made the whole trim job feel more manageable than it had at the start.There were also a few spots where I had to sand the top edge of the baseboard to match the slight unevenness in the drywall. I dropped the speed to the lowest setting and used light passes until everything lined up. The control I had over the tool let me do those small adjustments without overdoing it on the surrounding surfaces.

I have been using this cordless detail belt sander on a set of shelves I am building into an alcove in my living room. The variable speed control made it easy to match the power to what I was doing at each stage of the work. For the initial smoothing of the wood edges I used one of the higher settings and it took material off at a good rate without bogging down. When I got to the final passes around the corners and where the shelves meet the uprights I turned the speed way down and the belt responded immediately so I could feather the pressure just right. The pivoting arm came in handy when I had to sand the underside of a shelf that was already installed because I could angle it up into the tight space.The body of the tool is narrow enough that it did not bump into the adjacent surfaces while I was working in the confined area of the alcove. I found that holding it with both hands gave me extra stability on the longer flat areas and let me keep the belt tracking straight. After I finished the visible parts I ran my hand along the sanded edges and they felt ready for paint with no rough patches left. The cordless feature meant I did not have to hunt for an extension cord or worry about where the nearest outlet was while I moved the shelves in and out of the space. It has been a steady performer for this kind of built in project where there are lots of different surfaces and angles to deal with in one job.There were also some small gaps where the shelves fit against the wall that needed a light touch. I used the lowest speed and the front of the sander to clean those up without widening the gaps or damaging the wall surface. It gave me the precision I needed for those final details.

When I started cleaning up the welds on a small metal sculpture I was building for the yard the pivoting arm on this cordless detail belt sander let me follow the bends in the rods without fighting the tool or the piece. I could swing the arm out and keep the belt in full contact as the curve changed direction which saved me from having to stop and readjust every few seconds. I began with a higher speed setting to remove the high spots on the weld beads and then lowered it to blend the surface into the surrounding metal. The motor kept its pace even when the belt was working hard on the thicker areas and my hand stayed comfortable through the whole job. The slim profile meant I could get right up close to where the rods crossed without the body of the tool getting in the way. The brushless design seemed to help with keeping things running without extra heat building up in the tool during longer sessions.On the flatter sections I kept the arm straight and moved in long passes to keep the finish uniform. It was easy to see the progress as the rough texture from welding disappeared and left a surface that would take primer without any extra prep. I used my free hand to rotate the sculpture on the bench so I could work on all sides without putting it down. By the time I finished the visible joints everything felt smooth under my fingertips and looked ready for the next steps in the finishing process. This tool has fit right into how I like to work on these smaller metal pieces where control and access matter more than raw power. I did not have to switch tools or change methods mid job which kept my focus on the shape of the piece.

I have a project car that I am getting ready for paint and there are always those small areas around the door handles and in the seams that need attention before primer goes on. This cordless detail belt sander let me get into those spots and clean up the old paint and light rust without having to mask off huge sections or drag out a big tool for tiny areas. The pivoting arm was key when I was working inside the door jambs because I could swing it to match the curve of the metal and keep good contact without my hand getting stuck in the tight space. I started on a higher speed to cut through the old layers and then backed off to a lower one to feather everything out so the primer would have a smooth transition. The tool did not throw a lot of dust around which helped keep the rest of the car cleaner while I worked.For the areas around the wheel wells and under the fenders I could hold the sander in one hand and use a light to see what I was doing in the shadows. The balance of the tool made it easy to maintain even pressure even when I was reaching at arm's length. I noticed that the belt did not slip or lose tracking even on the vertical surfaces which saved me from having to stop and adjust it every few minutes. After I finished the visible spots the metal felt smooth and consistent which should help the new paint stick and look even. The cordless design let me move from one side of the car to the other without hunting for an outlet or untangling cords from the jack stands. It has become one of the tools I reach for when I have detail work on the body panels.I also used it on some of the inner fender liners where there was some surface rust starting. The variable speed gave me the option to be careful on the thinner metal so I did not go through it while still removing the bad spots. It worked well for those in between jobs where I needed something precise but did not want to set up the big equipment.