Heavy Duty Drawer Slides Side Mount 100 LB Capacity 10"

[Size: 16 Inch, Number of Items: 1]
These were easy to install. Just follow the instructions and everything should work smoothly. They glide perfectly well and seem very stable for my drawer. It fit perfectly as a replacement for my old 16in drawer slides.

[Size: 20 Inch, Number of Items: 1]
Not as easy to setup as i hoped

[Size: 16 Inch, Number of Items: 1]
These seem to be good quality drawer slides. They operate smoothly and do have full extension. I noticed that not all the balls on the second extension stay evenly spaced, but it doesn't seem to affect its operation. They are probably fine for the price; I haven't done much comparison shopping on drawer slides at this point.

[Size: 16 Inch, Number of Items: 1, Size: 16 Inch, Number of Items: 1]
I need to replace the worn drawer slides in an older cabinet I own. These heavy duty replacements are great and will hold even heavy drawers for heavy contents. The three smooth sliding sections make for a good full extension on heavy drawers without sagging. The smooth oiled ball bearings make opening and closing the drawer easy. The included directions have plenty of clear diagrams to guide you through installing these even if this is your first time. Mounting screws are included and their length is based on making sure they don't go through your wood drawer sides. If the drawer is made out of particle board, you may want longer screws. Particle board is not as strong as wood and is denser and heavier. I can't wait to get these in. These are nicer and smoother than the last set I installed in my work cabinets in my utility room. There is a nice soft bumper at the end of the slides that prevents drawer slamming.

[Size: 16 Inch, Number of Items: 1]
For some reason at the local big box store full extension and drawer slides are really expensive. It's been my experience that you can get these off brand ones from most woodwork. If you're doing something that's gonna have an extremely heavy or wide drawer it definitely pays to pay more. But if you're just using them on a regular drawer that you're not going to load up with like say a ton of silverware these kind work great. Interestingly the holes on them tend to be generally the same. What are the things you do need to keep in mind though is if the ones you have originally are lighter weight ones they may be narrower and not fit in the same spot that these heavy duty ones will. For extension means you can reach all the way to the back of the door and see the whole thing when you open it. Oneplus with these particular ones is that you can adjust the soft close so that it's related to what you're storing in there. At this these are a really a good value. If you've never installed these before it's not that hard if there already were slides but if there were not it can be a little bit tricky getting everything lined up. I highly suggest marking where your old slides were on both the drawer and on the cabinet before removing them.

[Size: 16 Inch, Number of Items: 1]
Very pleased with this set of drawer slides. While I haven't finished my project for them yet I can tell by testing them they are well made. They slide extremely smoothly are made of quality steel that will hold up over time. Ive dealt with a lot of these over the years and you can always tell the more plastic involved the worse they'll be. These have a very minimal amount of plastic, a good number of ball bearings and a good, positive stop for the close that retains the drawer without being overly stiff.They function as they are supposed to and come with a good little set of screws for installation. One mine gripe is the little baggie the screws were made out of was made of a brittle plastic and had basically disintegrated by the time I received them so do be careful opening the package because they screws might run away. Aside from that, zero complaints. They are competitively priced with other slides of similar quality / capability.

[Size: 12 Inch, Number of Items: 1]
This pair of Homdiy 12" HD Side Mount Drawer Slides are surprisingly good. The clips on the sides make separating the 3 part slide easy for both installation and once installed, access to remove the drawer. The set comes with short screws to mount both the cabinet and drawer side of each slide; usually the fasteners that come with these types of kits are useless, but these are both the correct type of fastener and decent quality - they were actually self "tapping" into the wood and when hand turned (vs impact driver) went into the plywood pieces without splits or tearout. The slides are constructed so the small part of the countersink screw head that is still proud of the rail does not interfere with the rail operation. The portion that attaches to the cabinet side has tabs, so if your box is slightly out, you can fasten it through the holes in the tabs, and then slightly bend the tabs to accommodate for a slight width differential from front to back.Once installed they slide in and out very smoothly. There is a bumper at the back to absorb the closing speed, and there is a slight lock at closing that prevents the drawer from opening itself. As described, they are full extension, so you don't lose more than 3/8" of your drawer depth.The 12" were $12 at the time of my order, which is a fair price. If I needed another set, I would order this brand and particular model again.