M8 Bolt Furniture Legs 6 Inch Wooden Bun Feet Set of 4

[Color: 6 Inch Espresso, Color: 6 Inch Espresso]
I Highly recommend these 6-inch wooden bun feet replacement legs! I initially ordered them, because I accidentally broke one the original legs on my sofa while moving, and I needed a reliable replacement. These worked out perfectly and are definitely worth the value.Not only did they solve my problem, but they are also absolutely beautiful and offer incredible value for the price. The espresso color looks rich and elegant, completely matching my living room setup. The solid wood construction feels incredibly strong and stable; in fact, they are just as sturdy, if not sturdier, than the original factory legs that came with my couch.The only minor hurdle was that they original pilot holes in my furniture did not align perfectly with the new legs. However, it was an easy fix- I just had to adjust the mounting plates on the furniture to make them work, and then the M8 hanger bolts threaded right in.I would definitely recommend these to anyone who wants to customize an upgrade a standard piece of mass-produced furniture to give it a high-end, personalized look.

[Color: 6 Inch Espresso, Color: 6 Inch Espresso]
I bought these wooden furniture legs to replace the plain, unfinished light-colored legs that originally came on one of my pieces of furniture, and the difference is immediately noticeable. As shown in my photos, the new legs completely changed the look and gave it a much more finished, higher-end appearance.The espresso finish is rich and even, and the wood feels solid and well made. The bun-style design adds a classic touch without looking overly ornate, making them a nice upgrade for a chair, ottoman, dresser, or similar piece of furniture.Installation was quick and easy. The M8 threaded studs fit properly, and each leg screwed in securely with no wobble. Once installed, the furniture felt just as stable as before.I also appreciated the consistency between all four legs. The finish, shape, and overall quality matched well, so the finished piece looked uniform from every angle.Overall, these were an easy and affordable way to give my furniture a fresh new look. Replacing the boring, unfinished light-colored peg-style legs with these espresso bun feet made a much bigger difference than I expected, and I'm very happy with the results.

[Color: 6 Inch Unfinished, Color: 6 Inch Unfinished]
Michanco M8 Bolt Wood Furniture Feet (with Hardware Included)Genuine Solid-Wood Quality: Beautifully crafted, sturdy wooden bun feet that instantly elevate the look and height of tired or upcycled furniture pieces.Complete Hardware Kit Included: Comes packed with all the correct mounting hardware and M8 bolts needed to properly and securely affix the legs to your project right out of the box.Versatile DIY Favorite: Perfect for all kinds of sidelines and DIY overhauls—whether you're converting an antique chest into a custom storage coffee table or restoring a vintage depression-era table (I am trying to decide between the two).Outstanding Value: Offers a fantastic balance of high-end craftsmanship and budget-friendly pricing for home wood-working and furniture restoration.The Verdict: A simple, high-quality, and reliable set of furniture feet that makes custom restoration projects a breeze. Highly recommended for any crafter or DIY enthusiast!

[Color: 6 Inch Espresso]
I got these mainly to lift a dark wood cabinet high enough for my robot vacuum to get underneath it, and they worked perfectly. The 6-inch height gave me the clearance I needed, and the dark espresso color matched the cabinet well enough that it looks like it belongs there. The legs feel sturdy, and the hardware is surprisingly good. The screws don’t feel like the cheap kind that strip the second you look at them wrong, and the mounting plates hold everything securely once installed. I also appreciate that the set comes with adhesive felt pads for the bottoms. That’s a small thing, but it helps protect the floor and makes the finished setup feel more complete.The only thing to watch is the finish. It looks nice, but it can chip if you drop a leg during installation. Ask me how I know. For $25, these are a good value. They added useful height, look nice, and made my cabinet robot-vacuum-friendly, which is exactly what I needed.

[Color: 6 Inch Unfinished, Color: 6 Inch Unfinished]
If you have a piece of furniture that requires a new set of legs or, as in my case, just needs to be a few inches taller, the Michanco furniture leg set is a winner. The kit includes the four unfinished legs, required hardware, and self-adhesive pads for the bottom of the legs. I ordered the six inch option, but the Michanco store has a plethora of shapes and sizes in a variety of finishes.I did notice that one of the reviewers received a poorly surfaced set with several cracks in the wood. I can only speculate that this is a quality control issue at the factory as three of my pieces were smooth and blemish free. The fourth example, while smooth, contains a small crack that will almost certainly be covered by a primer coat of paint and a small defect where, I suspect, a branch connected to the tree (see photo). I do not feel that my set will require any special effort to prep and paint (or stain). I suggest that if you order from this seller, you thoroughly inspect the items upon arrival so they can be returned if they aren’t up to scratch.Summary: My set of four furniture legs are of high quality, and the kit includes all the hardware needed. For $24.59, or a bit over six bucks a leg (7/19/2026) this represents good value. I have a specific project in mind for this set, but it will be a while before I can get to it. So, with the caveat to inspect upon receipt, I recommend this product.

[Color: 6 Inch Espresso, Color: 6 Inch Espresso]
I am very happy with these furniture legs. I expect that they are intended to be used on new furniture projects but I had a slightly different situation. I have long legs and the typical chair legs are too short for me and I will often get a backache. I got these legs as an experiment. These legs are about 1½ inches longer than the original legs on my chair, so I used them to replace only the front legs. This raised the front of the chair and also created a more comfortable incline to the seat. So far it is working well for me.The legs are solid wood that are turned with a classic profile that will look good on any chair. The espresso stain is very even and dark. The set of 4 legs comes with brass mounting plates and wood screws for mounting. The kit also includes sticky-backed pads to apply to the bottom of the legs to prevent scratching your hardwood floors.These are sturdy, good looking, high-quality chair legs that are better than most woodworkers can make for themselves. The time it would take me to attempt to make a comparable chair leg is worth way more to me than the cost of these. If you are building new, replacing old chair legs, or attempting an experiment (like me) these are worth it.

[Color: 6 Inch Espresso, Color: 6 Inch Espresso]
I just happened to be looking for a set of legs for a stool project I had in mind. I wanted to repurpose an old suitcase into a footstool. These were just the legs I was looking for. They are a nice height for the stool project. The color was just what I needed--dark. The legs are sturdy. The hardware is well made and the screws are not cheap ones that will strip in a heartbeat like some others. I consider it high quality hardware. I attached some wood reinforcing inside the suitcase and drilled 1/2" holes through the bottom of the case through which the leg screws would protrude. The brass fittings for the legs were screwed through the bottom of the suitcase into the wood reinforcement. The screws holding the brass plates to the wood were plenty long and hold nicely. there are three screws for each plate. For my use, I had to shim the legs to account for some unevenness in the suitcase. This helped me to have the case sit level.The finish on these legs is sufficient for my needs. It will chip easily of you drop them. (I learned that from experience.) Treat them well and they will be just fine. The set also comes with adhesive felt pads for the bottoms. That's a plus for me since I like to avoid scratches in the floor.Overall I would say these legs are worth the money.

[Color: 6 Inch Unfinished, Color: 6 Inch Unfinished]
Review of Michanco - M8 Bolt Furniture Legs 6 inch Wooden Bun Feet Set of 4, Replacement Legs (Unfinished):I ordered the unpainted 6" inch wood legs instead of the black color because the natural wood is the actual color I needed. Be aware that 'unfinished' isn't referring to the color. It means the wood is literally not finished - as in the wood surface is rough and not fully sanded smooth. It also lacks a base coat/ primer. It is just raw wood that will need a bit more TLC than just a paint job (see pics1-3). You'll need to coat it with a primer first to smooth over its rough surface, or go with a shellac/ staining / varnish route. If I knew just how unfinished these wood legs were, I would have ordered the black color and just painted over them. But at least now you guys know that ordering the unfinished variant will involve some TLC to get it up to "showroom" standards.QUALITY: I did not care for the quality of the wood. They were multiple imperfections in all 4 legs. Some had rot (pic2), others had white mold looking spots, another had a crack or then along the entire length (pic3).In addition these 4 furniture legs that measure 6 inches in length (pic5), for adhesive back thin foam pads are included for the bottoms of the legs as well as the mounting hardware to screw it into the underside of furniture (pic6).FINAL THOUGHTS: I can overlook the rough, unfinished legs since the listing did say it was 'unfinished'. But, I cannot ignore the poor choice of wood that was used to make these 4 legs. Only the shallow imperfections can be hidden under a coat of paint. If you're going to just stain or lacquer it, you will still the knotty burls (those bird's eye knots whirls). In fact, staining will make any imperfections even more visible and accented. For those wanting to leave it in this unfinished wood color, you'll be stuck staring at all these knotty burls, white spots, and surface cracks. I would not get this product again. I just can't look past the numerous flaws in EVERY single piece. I really hope what I received was a one-off and that it doesn't represent the rest of their wood stock.