RGB Deck Lights Low Voltage

[Color: Bronze, Size: 2PK, Color: Bronze, Size: 2PK]
We already have low voltage bollard lights to mark the end of our driveway and floodlights to add some interest to our front yard, but these are a great addition for adding some light to a wall. You'll need a low voltage landscape lighting transformer to convert your 110v mains electricity to 12v DC. These are easy to install - just a couple of holes to drill and then they screw to a wall or fence then link the cable up with your low voltage system.The lights feel built to last - they have a robust metal housing and the light itself is well protected behind durable clear plastic.There is a button on the bottom that changes the color. We prefer the warm white but you can easily switch them to other colors - for example green for St Patricks Day. This is actually a great way to do it - many of these products come with their own app to change color settings but you end up with several apps on your phone if you have lights from different manufacturers. Its much simpler to just include a button you can use to cycle through color choices.

[Color: Bronze, Size: 2PK]
This set is 12V low-voltage, 3W per light, 10-color RGB, hardwired, aluminum, and sold as a 2-pack. The metal housing is more durable than cheap plastic lights, 12V is appropriate for low-voltage landscape lighting, the downward-facing design gives attractive accent lighting without shining directly in your eyes, and the different colors look great around a pool or patio.The downside is installation. These aren't plug and play, they are hardwired 12V, so you'll need a compatible low-voltage transformer or power supply and wiring. Thankfully my brother in law is an electrician and he was able to wire these up for me and they look amazing!

[Color: Bronze, Size: 2PK]
Small deck lights are at their best when the fixtures almost disappear and the edge of the space becomes easier to understand after dark. That is what interests me about this ZestPatio set. The intended area does not need another bright overhead source. It needs quiet light near the perimeter, planters, and any change in walking level so the usable space is clear without washing out the evening view.I laid the fixtures out temporarily before considering any holes or permanent wiring. Equal spacing looked tidy on paper, but it did not look right at night. The area near a step needed the lights closer together, while the long straight edge looked cleaner with more room between them. Moving the loose fixtures around in darkness taught me more than measuring the patio during the afternoon.The housings stay visually small during the day, which keeps the patio from looking covered in little gadgets. Once powered for the layout test, the lower white setting gave enough orientation light without putting glare in my eyes. The light appeared where it was needed, close to the surface, rather than trying to illuminate every wall and window nearby.RGB color is a useful extra, not the main reason I like the set. A single purple or orange tone could support Halloween, and another solid color can change the mood for an evening. The busy effects are less convincing in a compact space. Most nights, a warm or neutral white makes far more sense because the deck still needs to function like a normal outdoor area.This is sold as a hardwired 12-volt system, so the transformer and cable layout are part of the project rather than an afterthought. Low-voltage power reduces some risk, but outdoor splices still need connectors suitable for the location, cables need protection from damage, and the supply has to match the total load. A long run can also lose voltage, leaving the last fixtures weaker than the first if the design is careless.Any fixed installation depends on property approval and a plan that does not damage the surface or create exposed wiring. The temporary layout was enough to judge spacing, color, glare, and placement without claiming a permanent installation. On an owned deck or another approved project, every cable could then be routed neatly and protected before the fixtures were attached.Water is the main environmental concern. Connections should not sit in low pockets where rain collects, and the power supply belongs wherever its own rating allows. The fixture body being outdoors doesn't protect an improvised splice under a planter. Cable paths also need to avoid chair legs, tools, door tracks, and other places where ordinary movement could crush or pull them.Control behavior deserves a full test before mounting too. I want every fixture to change together, hold the selected color, and return in a useful state after an ordinary power cycle. A row that restarts in a frantic effect would get irritating fast. During the temporary layout, the solid colors stayed coordinated and the lower white setting remained the most practical. That gave me confidence to plan around the lights themselves instead of designing the patio around the quirks of the controller.Accent and orientation are the proper scale for these fixtures. They are not tiny floodlights, and expecting them to light an entire yard would encourage a crowded layout or an overdriven system. Their strength is the opposite. They create a calm line of low-level light near an edge and leave the rest of the evening view alone.The temporary layout showed how the compact housings, useful low-level white setting, and optional solid colors could suit a patio, step, or deck edge. It did not establish a finished installation or long-run electrical performance. The visual result was deliberately modest: the walking boundary became clearer without making the surface look like a runway, which is enough information for the planning stage.

[Color: Bronze, Size: 2PK]
I am very impressed with these ZestPatio 12V landscape lights.The aluminum build feels heavy-duty and the bronze finish blends in nicely during the day. Wiring them into my low-voltage system was straightforward. The color-changing feature is the best part—having 10 colors to choose from makes it easy to set a fun atmosphere for outdoor gatherings or holidays. They add a perfect amount of accent light to our fence posts and steps.They are aesthetically pleasing and plenty bright.I also love the fact that these are waterproof. We live in FL where hurricane runs from June1 to Nov 1st. Typically, We quite a bit of rain during these monthsThese look really nice with our landscapingI highly recommend this product

[Color: Bronze, Size: 2PK, Color: Bronze, Size: 2PK]
First off, these are made of metal which is nice to see. They have a nicely finished appearance and aren't too glossy. I think they'll be easy to miss in the daytime. The lense and switch are plastic and they're pointed down which I think it helpful to their life.It comes with the hardware you'll need to mount it and some wire screws to hold the wires together too.The construction is above average at this price point so I think these are a good value. The'll be easy to install on wood posts but harder on concrete of course. I like the way they look.I hooked them to a TRIAC transformer and they worked fine. The vid shows everything but I forgot to mention that when you turn them off and then back on, they remember where they were and put out the same light as before. That's important and I should have said it on the vid.Overall, these are a very good value and seem to work great. I'm going to buy 2 more for my application. I think they'll work well. I'm not into the colors but maybe on Halloween?

[Color: Bronze, Size: 2PK]
Purposed-designed landscape lighting like deck lights make all the difference for when you want to add a bit of accent lighting to your outdoor space. These lights from ZestPatio are large and bright enough to cover a typical part of a deck or fence without being to big or bright.As noted in the product detail, these lights DO NOT come with any app or remote to control or change the color. For me that was huge selling point. I am perfectly find manually changing the color for the few times of year that I may want to adjust the light to the season. As my landscape lights are controlled by a timer, there was no benefit from any other way to manually turn these on/off. Changing the color of the light is as simple as the click of a button.Mounting was easy with just a few screws that you cover with a silicone plug to keep water out and it has the added bonus of making the overall finish look clean and professional.At 3 watts of energy consumption per light, these should not have much of an impact on the overall lighting budget of your transformer. Just make sure you are not hitting the top end of the rated power output as you do not want to run your full landscape light system at the max capacity of the transformer, but around 80-90% load.The all-metal constriction felt hefty and I'm confident these lights will have no problem withstanding the summer and winter weather.

[Color: Bronze, Size: 2PK, Color: Bronze, Size: 2PK]
I am really impressed with the functionality of these 12VDC small outdoor waterproof deck lights. They are very efficient using only 3W of 12VDC power consumption per light. They provide a surprisingly bright amount of light for the wattage. There are 10 color options to choose from (see photos) with a push button switch located on the front of the light for easy access. All colors provide adequate brightness with flicker-free lighting when on. Once your color is selected, the lights have a built-in memory to be that color each time it lights up which is a great feature. Installation is very quick and easy with the included screws and wire nuts. I especially like the simple screw 2 screw installation from the front, just screw in the 2 screws and done which makes it really simple. Many lights need templates and things like that, and it seems harder to get them to line up right. These are not difficult in any way. The light housings are all aluminum, which is stout and durable. They have a black and bronze rust resistant powder coated finish that looks very sharp. You will need a 12-volt DC transformer to power these lights because they are low voltage only. For this pair of light at just $26.50, they are worth the money in my opinion and a good value too for just $13.25 per light. They also included plenty of pre-installed wiring (almost 5-feet) to easily connect to the low voltage supply lines. These are very functional, versatile, robust, and durable lights for a great price, and I HIGHLY recommend them to anyone!

[Color: Bronze, Size: 2PK]
Review of hardwired 12 V RGB low-voltage lights: they have deck lights; they are waterproof; each light is 3 W. They use 12 V and have 10 color-changing capabilities. They’re wonderful for landscape lighting, outdoor spaces for Christmas, and well-made with aluminum and bronze, very sturdy and rugged.You can change the color of these lights as well without any hassle whatsoever, although there is no remote that comes with this product. There’s a button on each of the lights that allows you to select the light color that you wish from the 10 choices that you have, so you can change the lights if you wish; you could change them from red to red and green for Christmas, or purple and yellow for Easter whatever colors make you happy.I always used low-voltage in my backyard garden when my children were young simply because it’s safer for them and safer for any landscape I may have digging around the backyard. When you're digging, you don’t wanna hit an 110 V line; that’s life. If you’re in the rain and everything's wet, and the ground is wet, that could be a dangerous situation for a ground fault to occur with you in the middle of it.There’s no possibility of anything like that happening with regard to a low-voltage system. That’s why I’ve always preferred low-voltage systems.Installing these lights is easy with a low-voltage system. You need to buy a low-voltage 12/24 V transformer. It’s almost like a transformer. The kids have to use electric trains at Christmas time. The wattage is the important thing because you total all the lights that you use in total watts, and you should try to keep that under 80% of the maximum voltage of the transformer, where you run the risk of it overheating and being damaged.Why did you do it several times with low-voltage transformers? I put them in the basement or in the garage, draw a hole through the wall, low near the bottom near the floor, run low-voltage wire about 68 feet coming in, and usually buy a couple of hundred feet, maybe more, of low-voltage wire.Low-voltage wire looks like 110 V ZIP cord to find on a lamp. It’s rubber; there’s a crease in the middle. You can separate it with a screwdriver and have two separate wires, and one slide has a little ridge on it so you can maintain polarity. The connectors today don’t require you to cut the wire at all. They simply tap in to the wire itself and feed the current to your low voltage device these two devices together use 6 W. I would recommend you get a 350400 W transformer that way you can get lots and lots of low-voltage lights for your backyard fence lights, outdoor lights, decorative lights lights around the deck I love low-voltage lights doesn’t mean you have to use them every day but you can you have to total up the watts of each light so we got a 400 W low-voltage transformer. It really means you can use about 310 W of power, which should be the total of all the lighting fixtures that you use.A tremendous amount of safety ease of installation no need to hire an electrical contractor to do the work for you as as a matter of fact, I just run the wire out from the garage hidden along the edge of the house, jump on a garden run through the garden and bushes covered with bar chips that’s about the extended my bearing and concealing the wire then I would use the light up the underneath, part of trees around my deck on my deck stairway on my deck throughout my garden I’ve used lights and use the same circuit and the same wireYou don’t have to worry about your children getting a shock. You don’t have to worry about a landscaper getting a shock; it's a pretty safe system.