Solder Fume Extractor
Solder Fume Extractor
Key Features
- 【Soundproof Chamber with Acoustic + Damping Foam, Exclusive Downward Exhaust】 Most fume extractors have weak suction or loud noise. Zericuf solved this. The all-metal casing houses a soundproof chamber with acoustic and damping foam to trap motor noise—even at 320m³/h, noise stays below 58dB. Exclusive downward-sloping rear vent prevents hot exhaust from blowing onto your desk or floor. This design works with natural convection, dramatically reducing noise. Whether for soldering or laser cutting, Zericuf delivers power without the pain.
- 【320m³/h Industrial Suction +180W Brushless Pure Copper Motor】Weak fume extractors can't capture heavy soldering or laser smoke in time. Zericuf Fume Extractor packs a 180W brushless pure copper motor—quieter, more durable, and more efficient than brushed motors—delivering 320m³/h airflow, 60% higher than common desktop models (168-200m³/h). Effective capture range reaches 30cm+, grabbing fumes before they reach your breathing zone. Whether for electronics repair or 3D printer exhaust, this industrial unit from Zericuf handles it all.
- 【3-Stage Filtration with Double-Thickness Pre-Filter – H13 HEPA & High-Iodine Carbon】Unlike basic single-layer filters, Zericuf Solder Fume Extractor features professional 3-stage filtration: Stage 1, double-thickness pre-filter sponges (10 included)—twice as thick as competitors; Stage 2, True H13 HEPA—captures 99.997% of 0.3 micron particles; Stage 3, 800-900mg/g high-iodine activated carbon—superior to competitors' 600-800 levels, adsorbing toxic heavy metals and VOCs. Zericuf brings clean, purified air to your lungs.
- 【Smart Clog Alert+ Longer Main Filter Life 】"Affordable fume extractor, but killer filter costs"—we heard this pain. Most HEPA filters need replacement every 3-6 months at $30-$50 each. Zericuf changes the game. Our H13 HEPA + carbon main filter undergoes 24 quality checks—built to last. Plus, 10 double-thickness pre-filters trap large particles before reaching main filter. This extends filter life by 3X, saving you $150-$200 yearly. Smart buzzer alerts when clogged—no guessing. We engineer long-term savings, not just smoke extractors.
- 【Silent Swivel Casters with Brakes + Articulated Positioning Arm】Move freely and position precisely. Zericuf Solder Fume Extractor features 4 smooth swivel casters with front brakes—roll to any spot without heavy lifting, then lock securely in place. The articulated positioning arm rotates 360° continuously, reaches every corner, and stays exactly where you bend it with zero droop. Superior airtight sealing means no fume leakage and no loose connections. With Zericuf, your multi-angle soldering station becomes more flexible than ever.
- 【All-Metal Construction + Stepless Speed Control + 5-Year Warranty】Cheap soldering accessories use plastic that warps and motors that lose suction. Zericuf Fume Extractor uses industrial-grade materials: thick all-metal chassis—heat-resistant, impact-proof; 180W brushless motor maintains full power after 8 hours; hose passes 5000+ bend tests. Stepless knob adjusts suction from low to max. Smart buzzer alerts when filter is clogged. Zericuf offers 5-year warranty, 24/7 support, free parts. Choose Zericuf—more than a machine, true peace of mind.
Specifications
| Brand | Zericuf |
| Manufacturer | Zericuf |
| Model | XBY180-1 |
| Size | M |
| Product Type | AIR_PURIFIER |
| Included Components | Fume Extractor |
| Item Type Keyword | fume-and-smoke-extractors |
| Item Dimensions | H: 249 / L: 279 / W: 330 |
| unit |
Couldn't load pickup availability
- 5 stars: 6 (86%)
- 4 stars: 0 (0%)
- 3 stars: 1 (14%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
[Color: GREY]
I am using this with my F2 ultra, it works great! It met and exceeded my expectations. I made the mistake of embosing using this and I ran through 6 filters with one coin... 😅 with that being said it was user error for the filter clogging so much but as far as using for when im doing other things such as engraving on wood, leather, tublers and soldering it is amazing very quiet and I like the filter replacement warning. The issue is finding filter replacements. In two months with very heavy use i have burned through the filters and have washed the pre filters as much as I can but this is due to not being able to find a filter replacement. I know i 'should' have a proper vent for engraving but i am stuck in an office and had to resort to using a fume extractor...If you are not using it nearly as heavy as I am please grab this its awesome! If you are going to be using the system for heavy use like I am you may want to move onto another system or using an interim filter in tandem.
[Color: GREY]
This unit is great. I have an xTool S1 with a 40 watt laser in a heavy production environment. I did make an error in sizes, but this little guy was able to do its job for about 2 weeks. The time frame is not meant to diminish the product, but more to say that while it had the resources of a clean filter, it more than adequately handled the smoke and fumes.I was originally going to give 4 stars because it is impossible to find a filter. I reached out to the seller and received the absolute best customer service I have ever received on Amazon. The seller was extremely fast to reply and assured me that they would have a filter replacement kit in about a month and are sending me the stage 2 filter as a good gesture.As one seller mentions it is frustrating trying to get a hold of the seller, but that is Amazons fault and not the seller. You need to find the place to ask the seller a question, select the product, then Product information and finally other.
[Color: GREY]
I used it for a while. It’s pretty efficiency. And, it’s pretty cool. The package comes with several filter. It can last for a while. The setting part is also ok. It doesn’t take too long to finish the setting. It can take most dust!
[Color: GREY]
I do really like this fume extractor. I’m using it on a 60w Mopa fiber laser and it is pulling in so much of what I do not want to breathe. Many of these have either an on/off switch (one speed) or maybe 3 speeds if it identifies as fancy… this has a potentiometer that allows you to dial in the speed and suction that you need. Even on full speed, it is fairly quiet and easy to talk over without needing to raise your voice.
[Color: GREY]
What you should know, this particular piece of equipment works great!
[Color: GREY, Color: GREY]
This smoke extractor is very useful for welding processes and keeps the shop clean of the smoke and smell
[Color: GREY, Color: GREY]
I work in a nail salon, and the dust and odor from the nail products used to overwhelm me and my clients. I purchased the Fumeclear FC1001-A with the hope it would help at least a little bit. Well let me tell you I was pleasantly surprised. The Fumeclear cleans up the odor and dust from around my station greatly. I no longer am coughing so much my throat hurts and I don't get the headaches I used to get from all the dust and odors. If ever you wanted to invest in your health as a nail technician the Fumeclear FC1001-A is your go to air cleaner. Don't wait get this machine you won't go wrong. If there was a rating for this mine would be a 100% fantastic.