Peel and Stick Floor Tile 24 x 24 inch

[Color: Gray, Size: 24 x 24 inch, Number of Items: 20, Color: Gray, Size: 24 x 24 inch, Number of Items: 20]
These tiles are pretty big at 24” x 24”. I decided to go with a tile pattern with these and it came out pretty good. I have an old pool house with some old laminate glued down to the concrete and raised wood deck. I decide to just put this right over the top. I swept and vacuumed the floor then mopped with dawn and water. I’m hopping that surface prep will help the tile last. That being said the backs of the tiles are not very sticky which is a little concerning. I did have a small hand roller that I used to press the tiles down after install.Install is super easy, if you ever worked with any type of vinyl flooring install is the same. All you need is a utility knife with a fresh blade.

[Color: Gray, Size: 24 x 24 inch, Number of Items: 20]
I was pleasantly surprised by the quality of these RORA Peel and Stick Floor Tiles. We used them to cover the outdated floor in our guest bathroom at the ranch, and the transformation was amazing. The gray color looks modern, clean, and instantly updated the space.The large 24" x 24" tile size made installation much faster than working with smaller tiles, and they were easy to cut around edges and fixtures. After properly preparing the floor, the adhesive has held up well, and the tiles have remained firmly in place.The finished floor looks far more expensive than I expected for a peel-and-stick product. It's a great, budget-friendly DIY solution for anyone looking to refresh an older room without a major renovation. Overall, this was an easy project with excellent results, and I would buy these tiles again for future updates

[Color: Nature Wood, Size: 24 x 24 inch, Number of Items: 20]
These peel and stick tiles are a solid choice if you want a nice look without dealing with real wood.Build quality feels durable, they hold up well underfoot.What I especially like is that they come in big two by two foot tiles, so you're not fighting seams every few inches like you would with smaller planks.What I did was lay these down in the basement for the dog's area downstairs, and they've held up great.My only note is that the color is a wood grain look, not an actual wood replica, so don't expect it to pass as real wood up close.A total buy for a durable, easy DIY flooring project.

[Color: Gray, Size: 24 x 24 inch, Number of Items: 20, Color: Gray, Size: 24 x 24 inch, Number of Items: 20]
This was the easiest to work with and I think it looks amazing.

[Color: Gray, Size: 24 x 24 inch, Number of Items: 20]
The tiles are pretty and easy to install. I gave 3 stars because half of the boxes had bent corners making it hard to lay flat. It is noticeable.

[Color: Nature Wood, Size: 24 x 24 inch, Number of Items: 20]
The 2' x 2' square size means you can cover a lot of ground with just a single tile. I believe these floor tiles are excellent quality. The self-adhesive backing eliminates the need for glue, extra tools, and professional help. The texture and appearance of the natural wood look really good. The pattern has a nice look; the floor tiles look just like solid hardwood, and I think these will look great in my foyer once they're installed. They arrived in a heavy box weighing around 40 pounds, which was a surprise when I first lifted them. The tiles feel well-made and high-quality, unlike the flimsy, cheap-looking peel-and-stick flooring some might expect. The flooring is completely waterproof, stain-resistant, and scratch-resistant, and cleans up very easily. A set of 10 tiles covers 39.9 sq. ft making it a great value for the money. I highly recommend these tiles if you are looking for a fast and easy way to cover a worn floor.

[Color: Nature Wood, Size: 24 x 24 inch, Number of Items: 20]
I think the quality of these floor tiles is really good. They come in a pretty heavy box, around 40-some-odd pounds, which was actually a little surprising when I first picked it up. The tiles themselves feel substantial and don't have that cheap, flimsy feeling that some peel-and-stick flooring can have.I haven't had a chance to actually install these yet because my current home repair project has taken up pretty much the entirety of the last week. However, I did open the box and inspect the tiles, and based on what I've seen so far, the overall quality looks comparable to what you would find at a major home improvement store like Lowe's or Home Depot.The natural wood color and appearance look really good. The pattern has a nice, realistic look to it, and I think these are going to look great on my patio once they're actually installed.The package contains 20 large 24" x 24" tiles, covering 80 square feet total. I'm not completely sure yet whether 80 square feet will be enough for the area I'm planning to cover. Depending on how much cutting and waste I end up with during installation, I may need to purchase another package to finish the job.So far, I'm impressed with what I've received and I'm looking forward to getting them installed.

[Color: Gray, Size: 24 x 24 inch, Number of Items: 10, Color: Gray, Size: 24 x 24 inch, Number of Items: 10]
The peel 'n stick vinyl flooring tiles are really well made. The size, 2' x 2' spare means that you can cover a lot of ground with a single tile. We recently purchased a travel trailer that had some flooring damage, due to water intrusion, at both entrance doors. Instead of replacing all the flooring, these tiles will allow me to replace just a portion of the tile.I'm not trying to match the existing vinyl, rather I am using a contrasting color and pattern that goes well with the original flooring.The sub-flooring is in great shape. I started by removing threshold strip, under the door, then removing about 12 inches of the old tile. Then I peeled back about 8 inches of the covering over the sticky back.After placing the new tile in place, starting at the threshold.By cutting the damaged tile out in an arc, cutting both the new vinyl, and the old vinyl at the same time, I ensured a perfect cut, and an almost imperceptible seam, unnoticeable except for the different pattern (both the old vinyl and the new vinyl must be the same thickness for this to work with no transition strip.After I did the cut, I pulled the new vinyl up (remember I only exposed about 8 inches of the sticky back, then I removed the old vinyl up to the clean cut. Made sure the edges were clean, and lay the new vinyl down to ensure a perfect fit.I then peeled the rest of the covering off of the sticky back and lay the new vinyl down fully. Then rolled the entire vinyl piece, taking particular care where the seam was.Lastly, I came back with a vinyl sealer that basically melts the old and new vinyl together, ensuring a watertight seal where the old and new vinyl joined.Done! Great product, and I'd definitely order again!