long ratchet fu

[Size: 1/4]
I picked this up after getting frustrated with standard ratchets that could not reach certain bolts on my vehicle and this one solved the problem immediately. The extra long 12.5 inch reach combined with the flex head makes it possible to get into spaces that would otherwise require a lot of extension combinations and extra setup.The quick release mechanism works smoothly and the CR-V construction feels solid and well built. Nothing flimsy about it. The ratchet action is smooth with a good number of teeth so you can work in tight spaces with minimal swing arc needed.The flex head locks securely at different angles and does not slip or shift under load, which is important when you are applying real torque in an awkward position.Good quality tool for the price. Feels comparable to more expensive brands without the markup. Whether you are a weekend mechanic or do regular work on your own vehicles this is a genuinely useful addition to a 1/4 inch drive set. Would recommend to anyone who works in tight engine bays or undercarriage areas.

[Size: 3/8, Size: 3/8]
I requested this extra‑long ratchet mainly for the reach and leverage, and it definitely has both. The 17‑inch handle gives you plenty of swing room, and the flex head lets you sneak into angles a normal ratchet can’t touch. The length alone makes breakaway torque noticeably easier compared to a standard 10‑inch ratchet.I verified the 72‑tooth mechanism several times, and it does have all 72 clicks — but the engagement doubles up about 3–4 times per full rotation. The clicks are fine and consistent, but you can hear and feel those doubled engagements every time you test it. It still works as a fine‑tooth ratchet, but it’s worth noting if you’re picky about pawl precision.Backdrag is moderate. It’s not the lowest I’ve felt, but it’s low enough to work on snug fasteners without fighting the mechanism. The flex head holds position under load, though it has a little play compared to premium brands. Directional switch is smooth and stays engaged.Overall, the ratchet's balanced weight, ergonomic handle contours, and durable chrome finish give it a premium feel. It’s a solid long‑reach ratchet with real leverage and a confirmed fine‑tooth mechanism. The doubled‑up clicks and slight flex‑head play keep it from feeling premium, but for the price, it’s a more than capable tool that gets into tight spots and gives you the torque you need.

[Size: 3/8, Size: 3/8]
At 17 inches in length, this flex head ratchet should give you all the extra leverage that you need with your 3/8 inch drive sockets. It has nice, smooth 72 tooth ratchet action and a quick release button. The flex head action is also smooth and holds in position nicely. I feel that 3/8 drive sockets are most versatile for most uses, unless you are working on heavy equipment, so this ratchet fits my needs.When I first tried this ratchet, I thought there might be too much play in the flex head. But then I compared it to some other flex head ratchets I have (my old Craftsman USA, a Craftsman Taiwan, and a Gearwrench) and it was about the same. I have included a picture of all of these with the Der Erwachte to compare the lengths. Also, the latter has a screw pivot for the flex head that can be tightened up a little for less play.I have not had a chance to really put his ratchet to the test, but did put a ½-20 bolt and nut in my bench vise that I proceeded to tighten with a ¾ inch socket in the Der Erwachte. I leaned on it as hard as I could with no ill effects to the ratchet. I think that this is a pretty well-made tool and should hold up in use. I will probably add this to the tools I carry in my race car trailer that transports my grandson’s 600 micro sprint to the dirt tracks here in the northeast. Never know when we will need something extra long.One more thought on this ratchet. The brand name is Der Erwachte, which to me sounds German. In fact, according to Google’s AI bot, "Der erwachte" translates to "the awakened" or "the awakened one" in English. But this tool in made in China, not Germany. I don’t know if this is a deliberate attempt to deceive, but I really don’t care because I like this tool regardless of where it is made.I contacted the vendor through Amazon about the warranty on this ratchet and they replied that it is one year. This is okay, but not great because tools from some companies like HFT offer a lifetime warranty on their hand tools. At a current Amazon selling price of about $23, this ratchet is a fair deal.

[Size: 3/8]
Really like it and it gives you plenty of torque

[Size: 3/8]
Der Erwachte: Extra Long 180° Flex-Head 72-Tooth Ratchet, ⅜”-Drive, Cr-V Steel Handle, Cr-Mo RatchetThis product is a 72-tooth ratchet with 180° Flex-Head design and an extra-long handle. The ratchet is a ⅜”-Drive tool and it employs a Flex-Head design where the head of the ratchet can be pivoted 180°. The head of the ratchet can actually pivot 90° in either direction from the center line of the ratchet handle for a total of 180° of motion in total. The ratchet head is equipped with a detent mechanism that allows four individual angle positions to be held on either side of the center position.This ratchet is designed and is manufactured with a very smooth 72-tooth ratchet mechanism. This means that the ratchet need only be rotated 5° around the center of rotation to engage the next ratchet tooth with the pawl allowing for motion to be accomplished in even the tightest of work conditions. The ratchet has a change lever that is moved in one direction or the other to accomplish a directional change. This tool has a quick-release button to aid in attaching or removing the drive device attachment (socket or extension) being used with the wrench.The handle portion of this wrench is forged from Chromium-Vanadium alloy steel and it was measured to be 17-inches long. This choice of steel presents no issues in regard to tool strength or useability since the wrench handle will never have to endure the forces generated by impact-use conditions. The ratchet’s anvil and pawl, the components which receive the greatest stress during use, are forged from Chromium-Molybdenum alloy steel. The use of Chrome-Moly alloy steel allows those tool components to be made of a very strong steel with a high tensile strength. Tools and tool parts made from Chromium-Molybdenum alloy steel will stand up to very high stresses, are very durable, and are resistant to wear, rust, and corrosion. The manufacturer of this ratchet has chosen the best steel alloys for each major part of this tool. The wrenches have a mirror-polished finish applied to the wrench head and the extra-long handle while the ratchet components of the wrench are finished with a smooth black manganese phosphate finish. The manufacturer’s name (Der Erwachte) is laser etched into the mirror-polished finish of the handle.I am very happy with this ratchet wrench. It is a well-made tool that has an excellent finish. Furthermore, it is made of the best steel alloys for the jobs for which they are intended.

[Size: 3/8]
Sometimes, you need a long wrench or ratchet to reach that final bolt. Sometimes, too, you need a flex head ratchet to be able to slip a socket squarely on a nut or bolt and then be able to move it. This 17" tool marries both these functions, giving you a very helpful--but not always necessary--tool.The ratcheting head is fairly standard--but that's a good thing. The 72-tooth ratchet turns very smoothly with low back drag, and the reverse lever operated smoothly and easily from the get-go, unlike some discount tools that I've purchased in the past. The ratchet has a quick-disconnect feature that works quite well, by which I mean it both released sockets easily and hung onto them with some vigor. Especially if you're using the flex head feature, some of those odd angles could otherwise make you lose your socket.The flex head feature works effectively, but there's definitely some slop between the ratchet head stem and the arms of the ratchet handle. The socket is attached via a hex bolt, suggesting that the tension is at least somewhat adjustable. I didn't find the slop so offensive that I had to immediately fuss with that--I just wanted to use the tool.Bottom line: this is a decent amateur-grade tool. I have no expectations that it would last all that long in a professional mechanic's toolkit. However, for a more casual / weekend wrench like me, I expect it will outlast me. Recommended.

[Size: 3/8, Size: 3/8]
This is a really solid 3/8 ratchet and feels much heavier duty than I expected for the price. It has a good amount of weight to it without feeling awkward, and the finish and overall construction give it more of a premium-tool feel than a cheap generic ratchet. The handle is comfortable in the hand and the extra length gives you quite a bit more leverage than a standard ratchet, which should come in handy on stubborn bolts or anywhere you would normally wish you had a little more handle to work with.The flex head is one of my favorite parts. It moves smoothly and gives you a lot more options for getting onto bolts at awkward angles or in places where a straight ratchet just isn't ideal. The head doesn't feel loose or sloppy either. The push-button socket release also works really well and makes swapping sockets quick without having to fight them off the drive.At 17 inches long, this definitely isn't something I would grab for every small job, but that's also the whole point of it. It's great when you need extra reach or leverage, and it feels durable enough that I expect it to hold up well with regular use. Overall I'm very happy with it and it feels like a good value for a long flex-head ratchet.

[Size: 3/8, Size: 3/8]
This 17" 3/8" flex head ratchet delivers the control and ease of torque I expect from a long ratchet. I normally work with long flex ratchets, extra-long ratchets, and long breaker bars, so the length here fits directly into my workflow and gives me the torque and control I need without brute force. The flex head has seven positions with a spring‑loaded detent that holds the head where it should for a 3/8" flex design, and it stays predictable with the normal size sockets I use. The ratchet mechanism spins freely, the click is light, and the back drag stays low. Direction lever changes take a small amount of force.The handle has good thickness and sturdiness with a comfortable grip shape. Socket retention is strong with an easy quick release, and while the drive stud has minor play, it doesn’t affect retention or function. Fit on the square drive is acceptable for a tool in this class. The chrome has a medium polish and the tool has a low‑visibility logo.Overall durability feels appropriate for a long 3/8 flex head, and the combination of length and flex capability makes it a useful addition to my tool bag.