180° Liquid Tight Conduit Connector

[Size: 1 Inch, Number of Items: 5, Size: 1 Inch, Number of Items: 5]
Inspection:- Measures to spec for 1" knockouts and 1" liquid-tite conduit- Fits 1" knockouts as expected- Fits 1" liquid-tite conduit as expected- Includes nut for knockout side- Made from zinc as advertisedThese are for non-metallic liquid-tite flex conduit, they wont work with other types of conduit.If you need a heavy duty connector or are not allowed to use the plastic connectors in your application/location, these will work great. They knockouts as expected and the conduit fits and seals well.For metallic liquid-tite connectors, these are a pretty good value here compared to local options. These are just a little expensive more than the plastic ones locally and a lot less than metal ones.

[Size: 0.75 Inch, Number of Items: 5, Size: 0.75 Inch, Number of Items: 5]
These multilayer connectors grab onto EMT tightly, leaving essentially no space for air or water to get through. When you torque them down tightly the plastic sleeve does a really good job of deforming to whatever type of EMT you're using including zinc coated which historically I've had problems with because of the non-uniform surface.Ironically it doesn't do as well on plastic conduit, the coefficient of friction just isn't enough to keep them from sliding under tension, but if you just using them for water tightness in that case they actually do work decently well on plastic.I've got an outdoor wall piercing where water tends to collect and it always had a slim trickle of water getting through the zinc fitting by itself but this one did the trick for ceiling it up and after the last hard rain there was no dripping.

[Size: 1 Inch, Number of Items: 5, Size: 1 Inch, Number of Items: 5]
These conectors are as good as the Home Depot brand and work really well. The quality looks and feels very good, solid zinc alloy construction with a nice weighty feel, not cheap or flimsy at all.The watertight seal fits snug on 1 inch flex conduit and gives me confidence for both indoor and outdoor instals. For a 5 pack at this price, it is a great value without sacrificing quality. Would recommend and would buy again!

[Size: 0.5 Inch, Number of Items: 5, Size: 0.5 Inch, Number of Items: 5]
These liquid-tight connectors are well made and work as expected for securing flexible conduit to electrical boxes and enclosures. The zinc die-cast construction feels sturdy, and the insulated design helps protect wiring while providing a secure connection. The fittings install easily and tighten down firmly, making them suitable for a variety of indoor and outdoor electrical projects.The 5-piece pack is convenient for small installations or repairs, and the connectors fit standard 1/2-inch flexible and Type B liquid-tight conduit properly. Overall, the quality is good, the installation is straightforward, and they provide a reliable connection at a reasonable value.

[Size: 0.5 Inch, Number of Items: 5, Size: 0.5 Inch, Number of Items: 5]
This connector allows you to build up a mechanically sound termination to a run of non-metallic liquid tight flexible conduit. There is a polymer bushing to keep water out. There is a metal spud that threads itself into the inner wall of the tubing. There is a metal body connector that the compression nut snugs up to and it has an pre-fitted internal poly bushing to protect a wide array of wire types as they pass through. There is a polymer hub on the nut side making it similar to a Myers type of fitting. If you expect stress on the flexible conduit, like from falling ice or repeated vibrations like a pool pump motor, these connectors provide an extremely strong and reliable mechanical connection that allows for many types of wire to pass through and maintain ratings.

[Size: 0.75 Inch, Number of Items: 5]
These feel heavy duty and look professional. The yellow plastic has a ridge that gets compressed when the nuts are tightened down for a good durable seal and it has an insulated throat.A little dielectric grease smeared around the surface can help provide further corrosion protection at the compression surface, provided the grease is non-flammable, or you could use a smidge of nolox.The nuts tighten and fit good, I use a nut wrench as opposed to the screw driver and hammer method so YMMV.They're reasonable in price for a full solution that covers wet rated areas.

[Size: 0.75 Inch, Number of Items: 5]
These AIRTAK 3/4" liquid-tight connectors are an excellent, high-quality solution for outdoor installations. They carry the necessary UL 514B listings and markings required to satisfy electrical inspections. I personally prefer using these metallic connectors over plastic alternatives when mounting to metal boxes, as they provide a much more secure, confident connection when cinching them down to an enclosure. I also don't have to worry about overtightening.I recently used these for an EV charger installation; while the location is technically just a "damp" area, it is situated very close to a water source, and I wanted to ensure there was absolutely no risk of water intrusion. The installation was straightforward, and I am fully confident in the integrity of the watertight seal.It is also worth noting that these are versatile, as the description confirms compatibility with both LFMC (liquid-tight flexible metallic conduit) and LFNMC (liquid-tight flexible non-metallic conduit). Whether you are using Titan conduit or standard Liquiflex, these will work perfectly. I definitely recommend these for anyone working in wet or damp environments.