90° Liquid Tight Conduit Connector

[Size: 0.5 Inch, Number of Items: 10]
Item as described, fast shipment

[Size: 0.75 Inch, Number of Items: 5, Size: 0.75 Inch, Number of Items: 5]
I ordered these for an electric panel I installed in my shed. These connectors were easy to install and work perfectly with 3/4” liquid-tight conduit. The fittings are durable and the connection is solid. While these can be tightened by hand I used two wrenches to snug up the fitting (weak hand strength on my part).

[Size: 1 Inch, Number of Items: 5, Size: 1 Inch, Number of Items: 5]
Inspection:- Measures to spec for 1" knockouts and 1" liquid-tite conduit- Fits 1" knockouts as expected- Fits 1" liquid-tite conduit as expected- Includes nut for knockout side- Made from zinc as advertisedThese are for non-metallic liquid-tire flex conduit, that's it. These wont work with other types of conduit.If you need a heavier duty connector, or are not allowed to use the plastic connectors in your application/location, these will do the trick. They fit knockouts as expected and the conduit ends fit and seal on the liquid-tite conduit well.For metallic liquid-tite connectors, these are a pretty good value here compared to local options. These are just a tad more than the plastic ones locally and a lot less than metal ones.

[Size: 0.5 Inch, Number of Items: 5, Size: 0.5 Inch, Number of Items: 5]
This connector allows you to build up a mechanically sound termination to a run of non-metallic liquid tight flexible conduit. There is a polymer bushing to keep water out. There is a metal spud that threads itself into the inner wall of the tubing. There is a metal body connector that the compression nut snugs up to and it has an pre-fitted internal poly bushing to protect a wide array of wire types as they pass through. There is a polymer hub on the nut side making it similar to a Myers type of fitting. Far superior in strength compared to the common pvc terminations.

[Size: 0.75 Inch, Number of Items: 5]
These are high quality, professional fittings with all of the appropriate markings stamped on the housing. They're about the same quality as you'll find at the big box stores and reasonably priced for water tight rated connectors.I like that they also include insulated throats.These work with metallic and non-metallic flex water tight conduit and fit well.If you've never installed them before they're fairly intuitive and straightforward.

[Size: 0.5 Inch, Number of Items: 5]
I got the pack of 5 90s for 1/2 inch conduit. These come with the plastic seals on each side for water-tight connections as well as the nuts. There's also plastic inserts to protect the wires pulled thru them. Should work for your wire runs.

[Size: 1 Inch, Number of Items: 2, Size: 1 Inch, Number of Items: 2]
I picked these up for a project where I needed to make a 90-degree turn out of a weatherproof box, and they worked exactly as expected. Having the angled design made routing 1-inch liquid-tight conduit much cleaner than trying to force a tight bend, especially in a cramped space.The connectors feel solid right out of the package. They're made from zinc die-cast metal with a galvanized finish, so they have a nice weight to them and don't feel flimsy or cheaply made. The threads were clean, the locknuts tightened down smoothly, and everything fit together without any issues. Once installed, the gasket and split gland ring created a secure, watertight seal that gave me confidence they'd hold up well in outdoor conditions.I also appreciated the built-in insulation ring, which helps keep the wire insulation from rubbing against the metal edges during installation. It's one of those small details that shows some thought went into the design. Installation was straightforward, and the connectors fit standard 1-inch liquid-tight flexible conduit without any modifications or excessive force.The two-pack is convenient if you're running conduit into both ends of an enclosure or working on multiple projects. They seem well-suited for outdoor lighting, pump controls, HVAC equipment, pool equipment, or any installation where moisture protection is important.My only minor complaint is that, like most metal conduit fittings, you'll want to take your time tightening everything evenly to ensure the gasket seats properly, but that's more of a normal installation practice than a flaw with the product.Overall, these are sturdy, well-made liquid-tight connectors that do exactly what they're supposed to do. They install easily, create a dependable weather-resistant seal, and the 90-degree design is a real advantage when space is limited. I'd definitely use them again for future electrical projects.

[Size: 0.5 Inch, Number of Items: 5, Size: 0.5 Inch, Number of Items: 5]
These 1/2” liquid‑tight 90‑degree connectors get the job done, especially for basic indoor or outdoor conduit projects. The zinc‑alloy construction feels solid, and the corrosion‑resistant finish is a nice touch for long‑term durability. The watertight seal works as advertised, and the 90° elbow design is convenient when space is tight or you need a clean bend in your flex conduit. Getting a 5‑pack is also great value for small projects. That said, they’re not flawless. The threading can feel a bit rough on some pieces, and a couple of connectors required extra effort to seat properly. They work, but the consistency isn’t perfect across the pack.Overall, these connectors are serviceable and reasonably durable, but the quality control could be better. A solid option if you need something affordable and functional, just don’t expect premium precision.