Workbench with Wheels

[Size: 32“ x 18”]
Would have given 5 stars except the table top has no pre drilled holes. You need to measure, center the rails and drill holes in the top in order to screw it to the rails. This means you must own power tools and know how to use them. I have no idea why they didn’t just pre drill the holes. Do not purchase if you aren’t able to do this.

[Size: 32“ x 18”, Size: 32“ x 18”]
The frame of this workbench is made out of heavy duty tubular metal. The assembly instructions are easy to follow and all hardware necessary is included. The height of the workbench is adjustable. This workbench comes with the option of using wheels or large pads at the ends of the legs. The table top on the workbench is made of thick, Crestwood and is very sturdy. It is covered with a moderately thick layer of epoxy. I rated with this workbench a little higher than I would just for rating the product because there was one piece missing when I assembled it and I contacted the manufacturer. I received a reply less than 12 hours after I send an email and after describing the missing part and providing a picture the manufacturer sent the missing part. It is refreshing not only to get such a prompt response but also to be able to get a missing piece.

[Size: 32“ x 18”, Size: 32“ x 18”]
I ordered the EVERHANGER Workbench with Wheels, Adjustable Height Work Table, 32“ x 18”Heavy Duty Workbench for Garage, Rubber Wood Top Workstation for Workshop.I ordered this to use in my laundry room as a scrubbing and folding table and in my garage in my workshop as an accessory assembly table. In the laundry room, I will apply a plastic surface cover that I have to protect the wood from moisture.For those who weren't planning on using the wheels, there is a big negative. The flat feet that you would use instead of the wheels are not flat. And, I couldn't find any way to fix the issue with the flatness because it is internal to the structure. Good thing for me that I always intended to use the wheels on this. But the manufacturer needs to address making sure that the flat feet that they send with this workbench are actually flat. They need better quality control. If I were using the flat feet I would subtract another star making this only a three-star item.Overall, this workbench was very easy to assemble and the instructions are clear.Well the table is adjustable, it is not as easily adjustable as I would like. In order to adjust that you have to remove two bolts on each leg, and that means eight bolts total. To make it a quick and easy process you really need to have the table turned upside down remove all the bolts adjust the table to the height that you want and then put all of the bolts back in. In practice you will probably be wise to put in one Bolt in each of the four legs and not tighten down the nut until you determine whether that new height that you've adjusted it to is the height that you actually want. If I've got lying around in my boxes of parts some bolts with handles on them are the correct diameter to fit through the holes and have the proper thread pattern, I will probably replace these leg bolts to make the disassembly assembly process easier. In my laundry room, I went this table at the highest type possible and in my garage I am looking more to use it at counter height. Half of one star deducted for the amount of work it takes to adjust the height of the table. It simply is not a table you can go back and forth between Heights on at a whim. This is very versatile and it could be even more versatile if the height adjustment were made easier through a different height adjustment mechanism rather than two bolts per leg.The construction of the metal and the pain treatment is well done and I found no flaws in that.The wood top is a little rough on the top and bottom surface and the edges are unfinished and without sealer, it appears. There is no pre-drilled holes for the screws that are used to mount it to the metal frame so you have to do a very good job of aligning it in the corners to make sure that you have it centered all the way around. In the case of my table, the frame fits two and a half inches from each short side 1 and 1/4 in from each of the long sides. Once you you get this centered you'll want to use a pencil to mark the holes on the wood through the holes in the frame without bumping into the frame and messing up your alignment. Then remove the frame off of the wood drill your pilot holes and remember not to go too deep. You can use a drill stop or even a piece of tape on your drill bit to Mark how deep you want to go. After you drill the pilot holes in the wood top, then you need to put the frame back in place and screw the screws into the pilot holes that you drilled. You could use a small light pencil mark at the corners of your frame on the wood before after you line it up and before you remove it for drilling the holes and that way placing it back at the same spot will be relatively easy. 1/2 star deducted for no pre-drilled holes for mounting the top to the frame.Overall, four stars from me for now.

[Size: 32“ x 18”, Size: 32“ x 18”]
I needed a movable table for different implements, this fit the space and I added a shelf to the bottom.

[Size: 32“ x 18”]
Recently got the Bambu Labs H2S, and I wanted a table that wasn't too big but big enough to fit my printer with some extra workspace on it, and landed on this one. The main reason I got it is that it has a little bar connecting the legs, which helps stabilize side-to-side sway, which, if you know the H2S, it really likes to vibrate things. Out of the Box assembly was super straightforward, screws and stuff were not exactly labeled, but it was pretty easy to understand what went where, and probably took me 20 minutes to put together. As for the tabletop its really smooth. I thought there would be more of a basic finish or no finish at all, so for a moment I thought there was a thin plastic sheet on it, but there was, in fact, not. There are no pilot holes on the top, so you're free to choose which side you want, and you have to line it up yourself, which isn't hard at all. After putting it together, it's pretty solid. Super sturdy, no wobble whatsoever, though the H2S still does vibrate it, which is no surprise, but it stays in place and can withstand the weight of a 70lbs 3D printer with plenty left to accommodate many more things. Good value for the money.

[Size: 32“ x 18”]
Overall this is an excellent multi-use table. I can use it for car/garage maintenance, as a super stable mobile projector stand, and even as a comfortable meal table when I'm eating in my bedroom. I actually used it for just that during lunch today while watching the current news. It was great. It has plenty of room for my long leg room when I'm seated and it's the perfect height at its lowest setting when I'm using my desk chair.So, why the 4 stars you might be asking. Well, that's because the height adjustment is done with 8 bolts instead of hand turnable knobs. It makes any of those adjustments quite laborious. I decided to use just 4 of the bolts to make any changes a little faster for me, but it's still annoying that I have to get a wrench out. It's just as stable with the 4 bolts as it is with the 8, so there's no drawback in that regard. I will definitely be on the lookout for some knobs that I can eventually use in place of the bolts.The second complaint is in reference to the assembly during the wooden table top step. There are no pre-drilled holes or markings to have it properly aligned with the metal support beams. I had to use a ruler and do my best to get an even alignment. I did alright, but it is slightly off by a millimeter or two, but thankfully it's not noticeable when in use.All that said, this has been extremely useful and massively convenient for me. The wheels roll wonderfully smooth and they rotate easily while steering it around due to their very quiet bearings. With those abovementioned caveats aside, I can say that I would want this table again if I had a do-over, and I thank you for the opportunity to try it so I could find out.

[Size: 32“ x 18”]
Workbench with Wheels, Adjustable Height Work Table, 32“ x 18” | Heavy Duty Workbench for Garage, Rubber Wood Top Workstation for WorkshopI picked up this rolling workbench recently to add a versatile work surface to my newly built shed, and so far it has been a pretty good addition. The rubberwood top is made of solid hard wood that shrugs off scratches and wipes clean easily after messy work, and it provides a stable area without taking up excessive floor space. I love that it comes with quality locking casters that roll smoothly into a corner when you are done, making it super convenient to free up floor space. The table feels quite sturdy once it is all set up, and it works well for a variety of activities like crafting, folding clothes, or standing and sitting while working on home projects.Performance-wise, the frame stays steady even when you are pressing down hard on it, though there is a tiny bit of a wobble at the tallest setting. The overall design is very functional, allowing you to raise or lower the table to customize your height. Once it is fully together, the whole thing feels solid and strong enough to hold a decent amount of weight for daily household use. Plus, it has a very clean appearance that looks nice whether you put it in the garage, workshop, or laundry room.To be fair, I do have a few honest complaints about the assembly and the build quality. Putting it together can be a bit of a chore because the manufacturer does not pre-drill or even mark any pilot holes on the wooden top piece, so you have to center the frame yourself and use your own drill and screwdriver to drive the screws in. You also have to be very careful not to overtighten anything by hand because the metal tube frame isn't super heavy-duty and can deform easily, and if you sink the screws too far they might poke through the top side of the board. My board also arrived with lots of scratches and minor dents on one side, though luckily you can just flip it over to the better-looking side before attaching it. Lastly, the stock photos show convenient twist knobs for adjusting the height, but it only came with regular bolts and nuts, meaning you have to find your own handle nuts if you plan on changing the height often.Overall, this is a decent, practical rolling table that gets the job done for a fair price. It might not actually hold the crazy high weight limits advertised in the listing, and the manual assembly definitely has a few annoying quirks. But for a simple, budget-friendly mobile workstation that moves out of the way when you don't need it, it is a solid value that works out just fine.

[Size: 32“ x 18”, Size: 32“ x 18”]
I have a number of items from Everhanger. They make pretty nice organization and project stuff. This table really is no exception. Things you can expect is good quality and a reasonable price.Things I like about this workbench:This came completely unassembled in a surprisingly small box. Unboxing went well. This workbench came with 4 casters and 4 feet. So you have the option for rolling or having a stationary bench. Tools and assembly instructions included along with additional hardware. The assembly was not difficult and for the most part, it was self explanatory. Including the time to unbox and organize the pieces, assembly was roughly 5 minutes. I ended up not using the supplied wrenches and used one of my wrenches and an impact driver. A Phillips screwdriver (not supplied) is needed to attached the wooden top to the frame.This bench is pretty nice. Note, this is not an outdoor piece. Weather will ruin the wood top. I opted to not have it in my garage and am using it more for office stuff and projects around the house. The casters can be locked, but I do not have a problem with it rolling away, especially on carpet. The wood top has a smooth, glossy surface and so far any clean up just wipes away.Things I don't like about this workbench:The installation of the wood top is not something to hurry through. The top has no predrilled holes, so you have to eyeball it to get the frame in the middle of the wood top. I ended up using a Phillips bit in an impact to screw the frame on. This will be a long task if you are trying to do this with just a Phillips screwdriver.This is an adjustable height workbench. Changing the height is not an easy task with this current design. I have to unscrew 8 bolts. Additionally, if i the top has any pressure on it for a project, these bolts that went in finger tight become difficult to remove without a wrench. But why are 8 bolts even needed? I ended up not using 4. I also 3D printed some knobs to more easily spin out the bolt heads. If the designers are reading this, please rethink this part. This will take this workbench from good to great.