Bathroom Exhaust Fan

[Set name: 80 CFM]
Fine, as fan was replacement for a 20yr old fan. Easy, fit right in, but was just a noisy

[Set name: 110 CFM]
Great exhaust fan at half the cost of the big box stores. Clean modern look, quiet, and pulls a lot of air. Easy install!

[Set name: 110 CFM(H2)]
Came on time and works as expected, quiet operation

[Set name: 110 CFM]
Replaced an old 1997 loud fan. This one looks beautiful, has very good air flow, and is quiet compared with the old one. Easy installation and easy fit

[Set name: 110 CFM]
This was a pretty easy retrofit install. My old fan had a slightly larger opening so when I put this one in, I had some gap to basically close I’m about an inch and a half. I used aluminum HVAC tape for that. I’m sure there is more proper way, but it works fine and it’ll hold. Other than that, there wasn’t really much to it removing the old unit, but really the hardest part. Wiring was labeled well do know that the unit only mount in one orientation and if that isn’t what you need, then you might have to bend the mounting lips and drill through the external casing, with screws. I did a quick smoke test and the fan removed all of it. It has decent airflow and I believe 110 CFM. There’s no light so if you have a dual switch, you’ll have to wire a light separately. When the water is running, you can’t really hear this unit so it’s pretty quiet.

[Set name: 110 CFM]
This worked out so well. It added light to a dark corner in my bathroom and so much quieter than the old fan we had!

[Set name: 110 CFM(H2)]
Directions were perfect, this is the right fan if you have to fit into a small space. Mine was only 8 inches wide in one dimension so I needed to get something that would fit in that same slot. Everything else was pretty easy to do I think that the fan is fairly quiet, but it seems to move quite a bit of air. I really appreciate that the cover is a little bit oversized so it hides the edge of the messy hole that I had to cut to put the fan in

[Set name: 110 CFM]
This fan was pretty easy to install overall. With the opening needed you can pass the metal box through the hole without having to bend the tabs on the side meant for securing on new construction. The challenges I had were the hose hole and the electrical connection were on same side and my hose and wires were on opposite sides so I just needed to stretch it in. My power drill also didn’t fit in the box to secure the wood screws to the stud so I had to do it at an angle. The wiring did come with easy connectors so the wires were secured together which was a pleasant surprise. The directions are pretty bad as the pictures are tiny and the description not as useful as it could be. If you seen YouTube videos of similar type units being installed, those are more helpful. As another reviewer mentioned the flap and duct piece is made of thin plastic so quality isn’t super top notch but the fan looks great and works after installed.