T Type Silicone Hole Plugs Kit

[Size: Black,7 sizes, 76 pieces, Color: black]
I really needed some silicone plugs like the small ones in this set for my glass top outdoor tables. These give the glass a cushion to sit on that clings enough to keep the glass put. I love the many sizes because I was able to find the ones that would properly squeeze through the existing holes where my old plugs had fallen apart or been lost. I also have other projects where I need to temporarily plug a hole while leaving it looking professional. These work great for the different size of holes I need to temporarily plug because they are soft enough to 'squeeze' in. The slight taper on each one helps you get the plug started while the rest of the plug will tightly fill the space and stay put. I found that I can also use them for bottle stoppers for my many small craft items!

[Size: white,1/2 inch, 12.7mm, Color: white, Size: white,1/2 inch, 12.7mm, Color: white]
WHY I CHOSE THESE PLUGSI have a small flat, drying rack that I have to put together every time I use it. The legs are metal tubes and as much as I love the rack, the manufacturer left the feet exposed so I had raw scratchy metal touching my wood floors. These little plugs saved my floors and I love them!THE PLUGSYou get a pack of little molded silicone plugs/stoppers. Before ordering I measured across the opening of my drying rack. The hole was exactly 1/2. The nice thing about these plugs is that because they are silicone and not plastic, they are malleable. As you can see phone the images, they fit perfectly inside the metal legs of my rack. And best of all, because they have a wider cap on the bottom, they give extra protection on the floor on won't slip inside the metal tubes.CONCLUSIONThese little plugs solved a small, nagging problem that has been weighing on me every time I use the rack, and I can now cross it off my to-do list. I'd give them ten stars if I could, if only for the peace-of-mind.

[Size: Black,7 sizes, 76 pieces, Color: black]
I’ve found this silicone plug set useful for covering unused holes in furniture, panels, and other DIY projects. Having seven different sizes in one kit makes it easier for me to find the right fit without needing to buy several separate packs. The silicone is flexible and easy to press into place, and the T-shaped flange helps keep each plug securely seated. I also like that the plugs provide a clean finished look while helping keep dust and moisture out. Installation is quick and doesn’t require any tools or adhesive. The assortment is well suited for small repairs and workshop projects, and the pieces are easy to keep organized for future use.

[Size: Black,1/2 inch, 12.7mm, Color: Black, Size: Black,1/2 inch, 12.7mm, Color: Black]
I obtained these for just one purpose, and that is to seal the filament holes in the top of my 3D printer filament dryer. They fit perfectly and seal exceptionally well. I couldn’t be happier. They come in different sizes and amounts, so you just need to measure your hole and they will more than likely have the size you need. They are especially great because they are flexible. I was going to print some of these, but then they wouldn’t have been stable when the heat from the dryer gets to them. With silicone, you don’t have that worry. I recommend these.

[Size: Black,7 sizes, 76 pieces, Color: black, Size: Black,7 sizes, 76 pieces, Color: black]
I was replacing a gate closure because the hardware was rusted and no longer worked. I realized I needed to replace as much of the hardware as possible with stainless steel. I needed about a two inch bolt with a flat face. The flat face would need to interface with a rubber plug that had a flat inside surface. These hole plugs looked like they would fit onto the flat head stainless steel . You can see in the photos how well the bolt worked for my application. I epoxied the bolt into the hole plug and fastened it with stainless steel flange nuts. The closure works perfectly and holds the gate tightly closed. The rubber hole plug does a great job protecting the redwood gate. I also do a lot of repairs and maintenance on our cars. Sometimes I need to plug holes for various reasons. I think these things will really come in handy!

[Size: Black,7 sizes, 76 pieces, Color: black, Size: Black,7 sizes, 76 pieces, Color: black]
These silicone/rubber plugs are thick, sturdy, and very handy when restoring my older Jeep. I use them for everything from deteriorated vacuum lines to body and drain plugs. You get a great variety of sizes for a low price, and since they are silicone, they should easily outlast the vehicle."

[Size: Black,7 sizes, 76 pieces, Color: black, Size: Black,7 sizes, 76 pieces, Color: black]
I received these black silicone hole plugs from amazon for a vine review.The seven different sizes will definitely come in handy for plugging holes in different projects. I can see using these for sheet metal holes where you want to prevent dust or water intrusion. I used a 1" plug to fill sheet metal holes in my wire feeder to prevent dust and welding spatter from falling into the base of the stand. The silicone should be heat resistant enough to resist damage.The sizes are about .025" larger than the stated sizes, which is a good thing, because you're going to have to friction fit these. So if you have a 1" plug, the plug measures 1.025" to allow it to fit tightly.The only drawback I see to the design is that they don't have a "barb" at the end to prevent accidentally coming out. If you plan on using these for a specific size, you're going to have to use them for the exact sizes they are made for, but that is a minor issue. You could also use some black RTV silicone around the base to make it a more permanent installation if this concerns you.There are an adequate amount of each size to finish multiple projects, so I think this is a good value kit.5/5 stars.

[Size: white,7 sizes, 76 pieces, Color: white, Size: white,7 sizes, 76 pieces, Color: white]
These come packaged by size and labeled with the size and how many are in each pack.These are wonderful. They are flexible and a little grippy. I bought them to plug the holes in large flower pots so I can make fountains out of them. They seem to be water tight. A good product in a variety of sizes.