Bi Metal Arc Edge Reciprocating Saw Blade

[Size: 10 Inch]
A Well-Made, Fast-Cutting Reciprocating Saw Blade Set That Delivers Great ValueI received the EZARC Arc Edge Bi-Metal Reciprocating Saw Blade 5 Pieces through the Vine program in exchange for my honest review.The bi-metal construction is high quality and the blades seem well made and durable — these feel like serious cutting tools built to hold up to demanding work without dulling prematurely or losing their edge under pressure.The cutting performance backs up the build quality. These blades cut quickly and work well across materials, making short work of jobs that lesser blades would struggle with.For a five piece set of well-performing bi-metal blades at this price point, the value is excellent.Overall, a solid and capable reciprocating saw blade set that delivers fast, reliable cutting performance right out of the box. A smart addition to any tool kit. Recommended.

[Size: 8 Inch, Size: 8 Inch]
Yeah, so the curve is such a simple idea that every blade intended for this purpose should have it. Makes it really easy to contour around a pipe, especially if it’s up in a joist with limited access. Not only doesn’t make an easier approach angle with your saws all, but it helps to cut through the pipe faster with more surface area due to the curve. This makes it more likely that you get a straight cut through both sides versus one side at a time quality seems pretty good and for the cost of six blades it’s reasonable considered the design. I definitely like these and we’ll see how they hold up since I haven’t had the chance to use them full out. I typically buy the Milwaukee or Diablo blades and if these don’t perform like that, then I’ll update this review.

[Size: 10 Inch, Size: 10 Inch]
These are nice bi-metal demo blades. These reciprocating saw blades engage approximately 110% more teeth than a straight blade, reducing load per tooth for efficient cutting. Delivers up to 2X faster cutting and longer blade life in metal tubing. The 6° angled shank provides a secure connection and creates a natural downward cutting force for stronger tooth engagement. Helps the blade bite into metal for faster, more controlled cutting. Using M42 high-speed steel teeth with 8% cobalt provides wear and heat resistance, helping maintain hardness and sharpness under high cutting temperatures for efficient metal cutting. Alternating tooth heights on the 14 TPI blade help improve chip evacuation and heat dissipation. The 10-inch (250 mm) blade provides a 5.91-inch (150 mm) effective cutting length for 0.08–0.24-inch (2–6 mm) metal tubing. The standard 1/2-inch shank fits most major reciprocating saws for broad compatibility and quick, easy blade changes.When this first arrived, I did my typical initial inspection and didn't find any major issues or defects that would render this unusable or unsafe to use. At this price point (~$22), I believe this is a decent value. However, currently there is a coupon available for 10% ($2.20) bringing the price down to $19.77 and making this a good value. A quick search shows similar items costing between ~$19-26. Would I order this again? Yes, I believe I would.Hope this helps.

[Size: 10 Inch]
Iwasnt sure how I was going to liek these sawzalll blades. THe curve of them i Knew would most likely make my cuts on round stock like conduit or all thread etc. work well. And I was correct it allows them to stay on the mark with greater is and bite in to the metal without any skipping or jumping. What surprised me even mor was it seemed to do the same thing for flat or squared stock. They are long enough to Cut through the majority of things you would be using a Sawzall to cut with. They have proven to be made of a sturdy metal with durable teeth that don't lose their edge after the first cut. The carrying case they came in is also very handy for storing whether it be in a tool bag tool box or work bench it keeps them protected dry and all in one place. The price is more than fair as well

[Size: 10 Inch]
This review is for the EZARC Arc Edge Bi-Metal Reciprocating Saw Blade, 10 Inch 14TPI, 3 Pieces (2X Faster, 6°Angled Shank, Bi-Metal with 8% Cobalt, Variable Tooth Height, for metal tubing, pipe, profiles) from the EZARC Store:Fast, Clean Metal Cutting with Great Blade Life!If you regularly cut metal tubing, pipe, or steel profiles, this 3-piece reciprocating saw blade pack from EZARC is a reliable addition to the toolbox. The 10-inch length provides plenty of reach for larger diameter pipes and structural pieces, while the 14TPI setup delivers a smooth, controlled cut through standard metal stock.The arc edge design combined with the 6° angled shank makes a noticeable difference when plunging into cuts. It bites in quickly and cuts fast without binding up or catching on raw edges. The variable tooth height clears chips efficiently, which helps reduce heat buildup during continuous cutting.The bi-metal construction with 8% cobalt holds up well under tough use, keeping the teeth sharp through multiple cuts instead of dulling out immediately on thicker steel.Priced fairly when compared with others in this category.If you are looking for a durable, fast-cutting blade set for metal pipe and structural stock, these EZARC blades are a solid choice that get the job done right.

[Size: 8 Inch]
Good price at $4 each for this 5 pack of 8" curved blades. There hardened Bimetal M42 which is steel and 8% cobalt for heat and wear resistance. What I like most is the curved shape which makes it easier to cut using an M12 sawzall which is really designed for a single hand. Straight blades tend to slide on pipe and the the curve sits better and allows for an easier starting cut. I'm using these to cut 1/2" EMT which is lightweight thinwall tubing and they cut through like butter and 14TPI cuts smoothly and deburring is quick and easy. One blade on only this tubing will last months. I got to test several types of Demo and thick steel blades when I had to cut out my lower control arm bolts. I went through several brand packs and found that M42 with a thick blade and low speed was the only way to get through a thick grade 8 bolt in 1 to 2 blades. Speed and then heat was the killer which quickly wipes out a section of the blade teeth and make the blade into scrap metal. I think these blades are definately suited to a grade 8 type task. Price for this pack is mid range from my experience over several similar purchases.

[Size: 10 Inch, Size: 10 Inch]
I picked up this 3 pack of 10 inch EZARC blades for a garage project. Standard cheap metal blades tend to strip their teeth after two cuts or chatter violently against round pipe, but these blades performed like absolute beasts.The curved "Arc Edge" and 6° angled shank make a noticeable difference right away. Instead of the blade violently bouncing or catching on the initial bite, the curved edge engages the metal smoothly and starts the cut instantly with much less hand fatigue and vibration. It pulls itself into the cut rather than requiring you to lean your entire body weight into the saw.The durability is where these really shine. The 8% cobalt bi metal construction handles heat buildup very well. I made over a dozen cuts through heavy gauge metal pipe on a single blade, and the teeth are still razor sharp with zero broken or rounded-off points. At 14 TPI, it hits the sweet spot for medium to thick wall tubing and structural metal, fast material removal while still leaving a clean, relatively burr free edge that doesn't need tons of grinding.At 10 inches, you get plenty of usable stroke length so the blade doesn't pop out of wide cuts or large diameter pipes. For the price, these easily rival or beat the high end big-box brand name blades costing twice as much. Highly recommended for plumbing, automotive exhaust work, or metal fabrication!

[Size: 8 Inch, Size: 8 Inch]
These seem well made.Thry come in a nice plastic shipping/storage container, with the 5 blades inside.Each is rigid, and has a sharp edge. The teeth are small and relatively fine, as you would expect on a metal cutting blade.They do measure 8 inches from tip to tip. Thecutting edge is about 7 inches long. The cutting edge is also curved to help it fit onto pipe - which they call a "ez-arc". It's not an extreme arc, but instead a nice shape that helps it fit a curved surface without being uncontrollable on a recip saw.One thing I didn't expect is that the teeth are painted along with the rest of the steel. While it should protect them from corrosion in storage, I thought it might dull them - but no, I was wrong. They are quite sharp and the paint is thin enough to not round the cutting edges.Overall they just seem like high quality blades.