4FT LED Wraparound Light

[Color: 3000K4000K5000K, Number of Items: 1]
Great kitchen light, has both brightness and color selections. For the price a great choice, install is easy and it just works. Defiantly will buy more of these in the future.

[Color: 3000K4000K5000K, Number of Items: 1]
The light works well and is plenty bright for most applications.The kens is more of a waffle texture and not the typical cracked ice.Removing the ends requires flipping the end cover up, works fine but could lead to issues if against the wall or you went to put lights end to end.Has a good look and as long as the lens does not yellow it should look good for a long time.The 2 rows of LED's mimic 2 traditional bulbs but maybe more noticeable with the lens type.The efficiency rated is 110lm per watt, that is good but not the newest best designs that are doing over 120lm per watt now. That would also be a premium product and not the more budget friendly of this light.The color spectrum 3000/4000/5000 kelvin gives you a narrow band of the range as typical warm white is 2700 pretty standard.The low end of daylight is 5000k with most being 6000/6500k for a more true daylight.It does not give a CR rating the is pretty important for true color representation.Typically if you don't see a rating it is not that great, but unlisted?Would not buy this if that is important, our at least ask!Installation is typical for this type of light with no surprises or incompatible for US.Noticed it is rated 100~277v, (50/60hz) that makes it universal for the world (US is 120v 60hz) and 277v is common for USA commercial and industrial use.

[Color: 3000K4000K5000K, Number of Items: 1]
A super-versatile wraparound LED light with three CCT choices (3000K, 4000K, 5000K), 3 power levels (55W, 65W, 75W) resulting in output levels of 6000lm, 7000lm or 8000lm. The conversion ratio is 110lm/W, not bleeding edge but quite respectable. The prismatic lens diffuses and spreads the light uniformly with minimal glare.Installation is easy, just be careful removing and re-installing that lens because its attachment is different from many others. Different, but actually superior, too.I guess the power and output selection ranges allow for matching to adjacent legacy fixtures, but for me I wanted the brightest white for superior illumination over the bay where I service my vehicles. The older fixtures with lower output are okay for general lighting, but this one give me maximum visibility under the hood.The output is superior legacy fixtures and it can save 60% or more on electricity consumption.Installation is straightforward and all of the necessary HW bits are included in the package. Once installed it has a modern look flush against the ceiling.The cost of $43.69 is steep for a single fixture, but the overall quality and versatility significantly differentiates it from less expensive lights. This fixture is a Cadillac-quality fixture that will add flexibility and netter illumination to your shop, garage, basement, kitchen or office.

[Color: 3000K4000K5000K, Number of Items: 1]
I installed this 4 foot LED wraparound light in my garage, and it made a huge difference in brightness compared to my old fluorescent fixture. The adjustable wattage and selectable color temperatures make it very versatile, allowing me to customize the lighting for different tasks and spaces. Installation was straightforward with the included hardware, and replacing the old fixture was much easier than I expected. The light output is bright, even, and flicker free, making it comfortable to work under for long periods. The low profile design gives it a clean, modern appearance, and the fixture feels sturdy and well made. I also appreciate the energy efficiency since it provides excellent illumination while using less power than my previous lights. Overall, this is a high quality LED fixture that offers outstanding performance, easy installation, and excellent value for garages, workshops, kitchens, or offices.

[Color: 3000K4000K5000K, Number of Items: 1]
I was looking to replace some old fluorescent fixtures in my garage, and this LED wraparound light turned out to be a great upgrade. It's surprisingly bright, even on the lowest setting, and the higher settings put out more than enough light for a garage. I also like being able to switch between different color of light, so I can choose a warmer light or a brighter daylight look depending on what I'm doing.The fixture feels sturdy and installs much like a standard flush-mount light. Once installed, the light is spread out evenly across the space without any dark spots or glare. It replaced my old two-bulb fluorescent fixture perfectly and made the garage look brighter, cleaner, and much more modern.

[Color: 3000K4000K5000K, Number of Items: 1, Color: 3000K4000K5000K, Number of Items: 1]
The carport 4' fluorescent light at my house has been a non-functional eyesore since I moved in, and I finally pulled the trigger when this option popped up. It's nearly identical in size and shape, so will replace the old, stained and non-working light fixture very well.The light looks very much like a "regular" fluorescent light fixture, even when lit, so it will be a good choice for replacing one light in a room that might have several similar old-school fixtures. I really like the option of adjusting both the total light output and the light temperature (aka "color"), since it allowed me to dial down the brightness and select the warmest option (to minimize the tendency to attract bugs in this rural setting).Installation is a breeze, with just two wires plus the ground wire being wire-nutted into the old fixture's wiring. I used two small(ish) screws to securely mount the fixture to my carport ceiling.The design for releasing the light diffuser panel is a little different from a typical fluorescent fixture, and a bit more elegant. The end panels both pivot outward allowing the C-shaped diffuser panel to be flexed away from the supporting notches it resides in. In some installations, the clearance on the corners of these rotating panels could make it difficult to move them enough to get the required clearance, but in my case there was just enough slack to get the diffuser on and off.There are handy hold-down clips built into the chassis of the light, allowing for a neat installation that doesn't result in the visual distraction of a wire nut hanging against the diffuser panel, looking like a giant bug inside the light.In the end, this light seems to be a solid value for those looking for a light fixture that's a little nicer-looking than some of the budget lights out there, particularly if you're trying to match the look of some old fluorescent fixtures.