12" Wood Blades

[Set name: Combination, Set name: Combination]
This Spyder 12" 60T Combination Saw Blade has been a solid all-around performer.It’s designed for both rip and crosscut work with the 60-tooth ATB-R configuration and carbide nickel-cobalt teeth. The 1" arbor fits standard miter saws cleanly, and the blade cuts smoothly through framing lumber, plywood, and trim with less tear-out than cheaper general-purpose blades.It holds an edge well under regular use and stays reasonably quiet thanks to the polymer-filled vents. For a combination blade it strikes a good balance between speed on rip cuts and cleaner crosscuts.Overall, a reliable 12" combo blade that handles mixed cutting tasks without needing constant swaps.

[Set name: Combination]
Teeth seem to stay sharp, the blade does not get hot with the cutouts. Very nice blade and does its job well. There are better blades out there for sure but you will also pay a lot more for them. This hits in that sweet spot for me.

[Set name: Combination, Set name: Combination]
Long-Lasting Spyder Blade at a Reasonable PriceI had the same impression from this blade as I did with the 10-inch Spyder blade I recently reviewed. The carbide nickel-cobalt teeth are noticeably higher quality than the inexpensive blades I typically see, and the blade tracks well and produces clean cuts.The big difference here is the price. At about $54 for a 12-inch, 60-tooth general-purpose blade, I think this is a very reasonable price for the quality. The 10-inch composite-specific Spyder blade I reviewed recently was around $120, where the premium was much harder to justify unless you're cutting a lot of composite material. This 12-inch general-purpose blade is much easier to recommend.For general construction work, it handles both ripping and crosscutting in wood, including framing lumber, plywood, MDF, and trim. The 1-inch arbor fits my chop/miter saw setup, and the blade feels substantial without being excessively heavy.If Spyder's claimed extended blade life holds up over time, this is a particularly good value. Even without relying on the marketing claims of several-times-longer life, the cutting performance and construction make the $54 price quite reasonable.