Toilet Paper Holder Self Adhesive or Screw Toilet Roll Holder

[Color: Brushed Nickel, Color: Brushed Nickel]
~The Good ~• Fits large rolls pretty good• Easy to load and unload• Comes with everything you need to mount• better than the "pull off" rolls because you dont have the roller pop out of your hand.• super easy to load and unload one-handed• looks very stylish and modern• doesnt rust in a moisture heavy environment like the bathroom• is wider than regular toilet paper rollersWhich means it might fit rolls that come from other countries ( sometimes Japanese or Chinese rolls of toilet paper are a bit longer in the roll, but not always, I just wanted to make sure i mentioned that)• Has a screw that you can tighten so the arm can lift up as effortlessly or firmly as you would like.~The Bad~• That screw that you can use to tighten the arm so it moves up and down firmly or easily comes a bit loose. So if you like your toilet paper roller to move firmly, you may have to keep retightening the screw. I've noticed mine has come a bit loose. But very little ove the past couple months.• Does not cover the same areas where your old typical roller was, so you may need to use touch up paint before you apply this new roller to cover up where your old roller was if you've had your home painted with the old roller not removed first. This isn't the rollers fault. So its not a bad mark against this product. I just wanted to mention it as a precaution.• Use the screws! If you dont want to use screws please read the following concern,• I do not believe the adhesive will work on semi gloss/ high gloss (any pores surface like drywall, texturing, etc) if your bathroom has alot of moisture from showering, I say this because most adhesives on these surfaces struggle when there is moisture and even without moisture on dry wall. I just noticed there was no warning in instructions about this issue. So I suggest using screws if you have any of these wall surfaces you are trying to attach this too. Make sure your walls ( or place you adhere this to) are PANEL or MARBLE / TILE or even metal. Wall paper might be okay too as long as its not a super easy to rip. And even finished hard wood walls like what you find in cabins. But if the wood expands and contacts with moisture it might also cause the adhesive to break away over time.I personally think that putting the screws in is the best option.I wouldnt say this is "space saving" because as I said above in "the good" list, its a little bit longer than regular toilet paper rollers. Just by a little bit though. However I believe it is actually way more useful and a better set up then the old versions. The only real problem I saw was the mentioning screw working itself loose. That MIGHT need to be replaced later.*picture explanations**In the picture I took that shows the arm coming out of the backing plate, you can see the little alenwrench area to tighten the tension on the arm.*And there is a picture of the backing plate against the area I had my old toilet paper roll and you can see where the paint is different. I kept it like this to show the size difference and to show what I meant by possibly needing touch up paint. I plant to paint it to match once I paint my bathroom in the near future.* I rubber banded the little alenwrench it came with so if that tention screw comes loose I can just tighten it right there instead of digging through a drawer or toolbox for the little wrench.

[Color: Brushed Nickel]
This toilet paper holder has a clean, simple look and works well without taking up much wall space. I like having the option to mount it without drilling, which made installation much easier and kept me from putting unnecessary holes in the wall. Once mounted, it feels reasonably secure and the roll is easy to pull from when needed.The rotating design is helpful when changing the roll and keeps it from easily sliding off the holder. The metal finish also looks nice in the bathroom and has a solid feel compared with some lighter plastic options. My only hesitation is that I would want to make sure the adhesive is given plenty of time to set before putting regular use on it.

[Color: Brushed Nickel]
I got this to replace a broken tile toilet paper holder. I had to patch the wall first. This holder has adhesive that is pretty strong, but I still attached it to a stud with a 2 inch screw. The material feels solid and it is easy to add a roll. It’s a good quality holder that should last for a long time.

[Color: Matte Black, Color: Matte Black]
I love the sleek design of this toilet paper holder! It is easy to flip the top up and change the toilet paper roll. I like that it has a simple, modern look to it. The adhesive on the back is STRONG! So make sure it’s where you want it lol.Overall I would say it’s pretty durable as long as you don’t rough handle it (aka kids being crazy pulling on it …) it feels sturdy enough but maybe slightly on the cheaper side of materials. Regardless, it gets the job done!

[Color: Matte Black]
I was looking for a sleek, modern upgrade for the bathroom and decided to try this wall mounted toilet paper holder, and it has been fantastic. I went with the adhesive mounting route so I wouldn't have to drill into the tile, and the nail free glue is surprisingly heavy-duty. It feels completely rock solid on the wall without any wobbling. The stainless steel finish looks highend, doesn't smudge easily, and has held up perfectly against bathroom humidity without showing a single sign of rust or wear. My favorite feature is the clever dual rod rotating design, which finally puts an end to rolls spinning out of control or slipping onto the floor while letting you swap out a new roll one handed in seconds. It has a nice, compact profile that saves precious wall space while keeping things looking neat and organized.

[Color: Matte Black]
I love how easy this toilet paper holder was to install! It gives you the option to either screw it into the wall using the included hardware or mount it with the adhesive backing. Since our bathroom wall is tiled and we are renting, I figured I’d use the adhesive mount so I wouldn't have to drill into the tile. It holds up firmly with zero issues.Loading a new roll is so much simpler now. There are no annoying spring loaded rollers to deal with that pop off if you do not align them just right. Our previous holder could never fit the extra large, bulky rolls that we prefer to buy, but this holder has plenty of clearance. The roll spins smoothly without getting stuck or jamming against the wall. The matte black finish looks great, and the quality feels solid and built to last. Highly recommend!

[Color: Brushed Nickel, Color: Brushed Nickel]
This toilet paper holder has a simple appearance, but there are several thoughtful details that make it stand out from many basic holders. I especially like the closed end design. Instead of pulling out a loose spring loaded rod, I only need to press the release to access the rod and replace the roll. It is quick, secure, and much easier than the traditional style. The holder is made from quality stainless steel with a brushed nickel finish that blends well with other bathroom fixtures. The metal has a solid feel and does not flex during use. The finish also wipes clean easily and gives the fixture a clean, modern appearance. Another feature I appreciate is having both adhesive and screw mounting options included. This gives flexibility depending on the wall surface and whether you want a permanent installation or prefer to avoid drilling. The instructions are easy to follow and all of the necessary mounting hardware is provided. I chose the screw mounting method, and once installed it felt very secure with no movement during daily use. The dual rod design also helps keep the roll from accidentally slipping off, which is a small detail that makes everyday use more convenient. The size fits standard toilet paper rolls well without taking up unnecessary wall space. Everything feels carefully made, from the finish to the moving parts. It is one of those bathroom accessories that may seem simple, but the practical design makes daily use noticeably more convenient. I am very happy with both the construction and the thoughtful features of this holder.

[Color: Brushed Nickel, Color: Brushed Nickel]
I love this toilet paper holder! It is stainless steel, very durable, and it looks great! The roll arm is attached on one side. Just lift from the right side to add full rolls or remove empty rolls.I pretty much always buy larger rolls of toilet paper, (double size rolls) and they all fit so far, which is a plus of this particular model.It's so convenient that it has two mounting options, either peel and stick or screw-in. I personally screwed it in with one side into a stud, which I highly recommend doing, but I've used these sticky strips in the past and they usually hold up well. If using the sticky back, I would not stick this over fresh paint, wait a few weeks. I'd also wipe the area with a higher strength rubbing alcohol and let it dry fully before applying, regardless of the surface or how old the paint is. Try to attach it to a flat, non porous surface. (A wall or the side of a melamine vanity. It won't stick as well to wood paneling or textured surfaces.)Overall this is an excellent toilet paper holder. I do want to clarify that contrary to the listing, this particular model is only for toilet rolls, it is much too small for paper towel. I'd love to have one for paper towel though, perhaps they have it in another listing.