[Voltage: 12.0 Volts (DC), Wattage: 30.0 Watts, Voltage: 12.0 Volts (DC), Wattage: 30.0 Watts]
The thick gauge metal is top notch, it’s heavy and durable. You can punch out the hole on the front of each, on the sides or at the front — you need to debur the edges. The inputs have 3 wires, black, white and green (ground) and the output has 4 wires — 2 pairs. In most cases, if you are using Triac, you will only use the black and red pair. The pink and purple pair is for a 0-10v system that requires a separate signal that tells the driver how bright to be.This is a universal dimmer, besides Triac, it understands ELV and 0-10V. It has a high headroom for my two 6W bulbs, since I am only using 12 W out of 30W, it stays cool and will last longer. If you are sure what to buy, then try this one, as long as your total wattage doesn't exceed 15-20W.The electronics on the closed compartment are encased in a resin. It provides electrical insulation, thermal management and noise reduction.Because of its size, it’s best suited for new constructions (open walls) or inside a cabinet, it’s a big box, bigger than a junction box, it will not fit through the octagonal opening of a function box. I ended up opening up the ceiling from above to install this, The wires were just long enough.There is no buzzing or flickering, and I can step through all the intensity at my dimmer switch.It’s also rated for outdoor installation. As a matter of fact, it’s perfect for outdoor use, the components are sealed and the top cover has a channel that prevents water penetration from the top leading edge. You can run 1” pvc conduits from the knockouts with adapters.It does not come with a printed manual, It has a QR code in the aluminum case that points to a 5 page manual (the 5th page is blank). It’s a http link, so it will warn you that the link is not secured, but I went there anyway, selected print and saved it as a PDF.The cost is reasonable for this level of quality and compatibility.
