Corner Clamps for Woodworking

[Size: 2pcs]
Worked as advertised

[Size: 2pcs]
This is an excellent quality tool that is a must have for anyone who does even a mild amount of woodworking. They are made of thick aluminum and are quite sturdy!. They can be installed either on the inside or outside of a corner, and with the included clamps, they grip the wood nice and tight. They are a versatile tool as well, since it can be used to make picture frames, cabinets, dog houses, etc... For the build quality and versatility it offers, these are a great deal.

[Size: 8pcs]
It's very handy when making corners

[Size: 2pcs]
Technically they work but it's so fiddly finicky that you could probably hold the part by hand easier and faster than trying to use this thing.

[Size: 2pcs, Size: 2pcs]
These are high quality corner clamps for securing frame corners during glue up. There are hash marks indicating measurements on all for sides of the corner angle. I guess that is nice... but not too sure what you'd use that for. I'm probably not going to use these instead of a ruler or tape measure. One problem that I've had with these is that they really only work well when you are clamping from the inside out (see the photos). Finally... if you are clamping anything with 4 sides... you are out of luck if you buy only one kit, which includes only two. I guess the option to buy 4 at a reduced price would be nice if offered.

[Size: 2pcs]
I already have a few corner clamps, but a woodworker can never have too many clamps! These are solid aluminum and truly 90 degrees, at least to the precision I can measure. These work great for holding two boards at a right angle for gluing/screwing together when making boxes, picture frames, cabinets, etc. The non-threaded end of a 90-degree bolt goes through a hole in the clamp, over one of the boards, then you tighten with the included spacer and thumb nut on the outside of the corner. If you've never used this type of clamp before, it can be a little fiddly until you do it a few times, but they work quite well. This version compares quite well with the similar high-quality clamps I already have. Keep in mind that you need a set of 4 if you want to build an entire frame all at once, or a set of 8 if you want to build an entire box all at once (4 for each open side). They are nicely anodized and have metric and imperial distances marked on them so the 90-degree sections can be used as a marking square in a pinch. Highly recommended.

[Size: 2pcs, Size: 2pcs]
The last time I did a woodworking project, I had a heck of a time ensuring that the box beams I was building stayed in square. I put another brand of these clamps into my shopping cart so I could get notified when the price dropped, but it also started recommending other brands that were similar. On a whim I decided to pick these up, and so far, I'm not disappointed.This is a VERY simple tool. The main part is 5.5" x 5.5", which is plenty of length to support most materials you would use. I'm likely only going to be using this on cabinet grade plywood - using them to build boxes or drawers. The build quality on these is EXCELLENT. All of the threads are cut well and the knobs screw on without any resistance. The length is spot on (I ALWAYS verify this on new measuring tools) and there are no burrs or imperfections.This jig is also very light-weight and packs down into a small box for storage. It is a nice touch that it has a foam insert in the cardboard so the pieces are rattling around loose.Overall, I'm very satisfied and will probably order more of these prior to my next big project so I can move even faster!

[Size: 8pcs]
works great and is 90 deg. dropped one star for me not counting - there are only enough clamps for 1 set of angles not both).