Copper Shield CAT6 Ethernet Wall Plate with Low Voltage Mounting Bracket

[Set name: 2 Port]
Not really built to go into a box. I had to flush mount a box because I put it on a concrete wall. I came up from a hole in the floor into the box but when I plugged the data cable in it is a tight fit. I had to the use box extenders to get it to plug in and not bend the cable to much.

[Set name: 2 Port]
I used this for a hardwired network run in my remote IT setup. Wi-Fi is convenient, but it becomes less magical after traveling through several walls and half the farm. The two keystone ports held the CAT6 connections securely, and both runs passed the cable tester on the first attempt.The stainless faceplate looks clean and professional, while the included low-voltage bracket saves a separate trip for mounting hardware. The shielding is useful around motors, inverters, and other electrically noisy equipment, provided the entire cable path uses compatible shielded components and is grounded correctly.My one minor complaint is that the polished plate collects fingerprints during installation. A quick wipe fixes that. Once mounted, it provides a sturdy, tidy network connection that looks much better than a cable emerging from a questionable hole in the wall.

[Set name: 6 Port]
TL;DR: Very sturdy, very high quality wall jack for $23. It’s probably overkill for most, but if you need the bandwidth and the reliability, this will do you wonders. This does NOT have keystone jacks, it has female-to-female couplers. This may be more convenient for you, or it may mess with your existing setup. FYI.I received this product for free through Amazon Vine.===========================This is a very solid Ethernet wall plate that feels much higher quality than many basic network wall jacks. At around $23, it is not the cheapest option, but the build quality and shielding make it a good choice for situations where reliability matters.The biggest thing to know before buying is the design. Despite looking like a standard keystone wall plate, this does **not** use removable keystone jacks. Instead, it uses built-in female-to-female RJ45 couplers. This can be more convenient because you simply plug Ethernet cables into both sides, but it also means it may not fit into an existing setup where you specifically need keystone modules.The construction is excellent. The plate feels sturdy, and the stainless steel faceplate gives it a more premium feel than typical plastic network wall plates. The shielded design is also useful in environments where electromagnetic or radio interference could be a concern.The six-port layout provides plenty of connectivity. For a home network, six Ethernet ports in one wall location is probably more than most people need, but for offices, server rooms, home labs, entertainment setups, or other network-heavy environments, having multiple hardwired connections available can be very convenient.The CAT6 compatibility makes it suitable for modern gigabit networking and higher-bandwidth applications. While many homes will never push the limits of a CAT6 connection, having a properly built, shielded connection point can help maintain reliability in demanding setups.The included low-voltage mounting bracket is also a nice addition because it simplifies installation. It provides a cleaner finished installation compared with leaving cables exposed or using improvised mounting solutions.The main drawback is that the shielded CAT6 design and six-port configuration are probably unnecessary for many users. A typical home user with one or two Ethernet devices would likely be perfectly fine with a cheaper wall plate. This is a product for people who specifically care about having a robust wired network.This would be a great option for network installers, IT environments, home labs, offices, or anyone building out a high-quality structured cabling setup. The built-in couplers may be either a major convenience or an inconvenience depending on how your network is currently configured.Overall, this is a very well-built Ethernet wall plate with excellent materials and useful features. Just be aware that it uses female-to-female couplers instead of keystone jacks. If that matches your needs, it is a great networking accessory.

[Set name: 2 Port]
Very easy install and works great. Nice appearance and worth the money.

[Set name: 6 Port, Set name: 6 Port]
This uses standard click in connectors which you'd use in patch panel or similar.The edges are very sharp, which actually cut me right below my middle finger when first looking at it, so that hurts.In the pictures I've replaced 2 of the clip in panels with a fiber one (The blue one, which is too wide and required some modification (as it also does for my patch panel)) and a different RJ45 jack (black) to test the compatibility and as expected it works. This will probably end up with 2 fiber connections where I'm putting it, but I have to run that.The panel looks nice and will replace a couple of wires going through the box in/out of the wall. These aren't punch downs so if you've got a similar situation, you can either give your wires ends or get some punch down snap ins if you want to go that route (but from what I've understood they aren't as good for faster internet.)Overall, I think these are good if the most expensive 6 port I could find on Amazon, The fact that it cut me combined with that has me giving it 4 stars.

[Set name: 3 Port]
I was finishing a structured cabling project in a home studio that shares wall space with dimmer switches and lighting control gear, which is exactly the kind of environment where unshielded network hardware picks up interference and creates intermittent link issues. I needed shielded keystone plates rather than standard plastic ones to maintain a complete shield path from the cable through to the port, and the stainless steel faceplate was a bonus since the studio has a commercial aesthetic that cheap white plastic would ruin.The stainless steel faceplate is noticeably more substantial than the thin stamped metal covers that sometimes pass for steel in cheaper hardware. It sits flat against the wall without any flexing and the brushed finish looks clean and intentional rather than like an industrial leftover. The copper shielding layer is visible when you look at the back of the plate and it covers the full interior surface that faces the keystones, which is what you need for effective EMI and RFI reduction rather than just a token layer around the perimeter.All three keystone slots accepted standard shielded Cat6 keystones without any forcing or trimming. The retention is firm enough that the keystones stay seated during patch cord insertion and removal without the entire insert pulling out along with the plug, which is a frustration I have had with cheap faceplates before. The spacing between the three ports is comfortable enough that three patch cord connectors can sit side by side without bunching together.The included low voltage mounting bracket made drywall installation straightforward without needing an electrical box behind the wall. The bracket flips out behind the drywall as the screws are tightened to create a secure anchor without any wall damage beyond the single cutout, and the plate sat flush and level against the wall on the first attempt. For anyone running network cabling through drywall for the first time, having the bracket included in the kit rather than needing to source it separately is a practical convenience.Since completing the installation the network connections behind this plate have been stable without any of the intermittent packet loss I was experiencing before with an unshielded solution in the same location. Whether that is entirely attributable to the shielded plate or to the shielded keystones and cable working as a complete system is difficult to isolate, but the interference-prone location and the stable result since the upgrade are enough evidence for me that the shielding is doing its job.For shielding to be effective the entire cable run needs to be shielded end to end, including the cable, keystones, and patch cords. Using a shielded wall plate with unshielded keystones or standard Cat6 cable defeats the purpose entirely. The shield also needs to be bonded to earth ground at one end of the run for proper EMI protection.This is a three-port faceplate. If you need more or fewer ports, this product only comes in the three-port configuration so plan your cable runs accordingly. Single and dual port versions from the same product line may be available separately if your location only needs one or two connections.For anyone building a structured cabling installation in an environment with electrical interference, or simply for anyone who wants a wall plate that looks genuinely professional rather than like a cheap white plastic afterthought, this shielded stainless plate is a well-made and practical choice. The build quality is clearly above the standard plastic competition and the installation with the included bracket is cleaner than most. Just make sure your full cable run is shielded end to end for the EMI protection to actually work.

[Set name: 2 Port]
4 stars: Copper Shield CAT6 Ethernet Wall PlateInstalled this in my home office to replace a basic unshielded plate. The included low voltage bracket made drywall mounting straightforward, but fitting the keystone jacks into the ports took some real pressure - they seat tight enough that I double-checked I had the right keystones. Once snapped in, my 1Gb connection came through clean with no hiccups.The copper shielding does its job, and from across the room the plate looks sharp - a nice brushed nickel finish that reads as professional. But pick it up before mounting and you notice right away it's too light. This isn't stainless steel. Feels and weighs like zinc or pot metal with a coating. Tap it with a fingernail and it plinks hollow instead of the solid ring you get from real stainless. On the wall nobody will question it, but once you've handled actual stainless plates the difference is obvious.At $16 it's priced right alongside genuine stainless options, and that's where I dock a star. Signal performance is solid and it looks the part from a distance, but labeling it stainless when it clearly isn't stings a little. Still worth it if the copper shielding is what you're really after.

[Set name: 2 Port]
These are basically the easiest way to get a nice clean install accomplished if you aren't built for working with punch down patch panels and such. That or you just don't want to bother with it, like me. In a wireless world, I still prefer my wired connections, so I added network cabling to every room in the house when we first moved in, and somehow managed to route half of them to what later developed to be the wrong side of the room.This set gave my in-home workspace (my first priority) a very nice finished look with a functionally superior stainless steel wall plate that is head and shoulders above the cheap plastic stuff I have everywhere else. The commercial look fits the room, and the ease of connection was stunningly simple. My modem and router are in the finished basement that has a acoustic tile drop ceiling, so access was easy peasy, having only to drill up through the easily identifiable wall bottom plate and the feed the cable. Once the cutout for the box was accessed from inside the room the cable was a simple item to grab and plug in. The included old work box makes it all even easier if you aren't already working with solidly mounted work boxes.Performance-wise nothing was lost in transmission vs. the trip hazard that I had previously run across the floor from an adjoining room, so this was a win on several counts. Given the ease of use, quality of build and accessories, and excellent performance I consider this an very good value for the money that also happens to look pretty sharp.