Reinforced Polyurethane Air Hose 3

[Size: 25 FT]
Soft and flexible and lightweight. The 25 foot once stretched out with pressure (120 psi) in it stays fairly straight with minimal recoiling at the end, that was without testing it with any air product attached. Like most hoses other than rubber, once coiled any polyurethane, PVC or hybrid hose tends to wanna go back into its coiled position, this one stays pretty minimal at attempting that and it does coil up easily and nicely for hanging on the wall. The end swivel connectors seem of a nice quality brass grade and I like the fact that it has a six ball coupler instead of the standard four ball coupler, and as of now connectors have no leaks. But as I have discovered that is one of those only time will tell kind of things, because I had recently purchased a rubber hose that came with connectors from Amazon that I absolutely loved, until about two weeks in and rather unusual rubber seal set up inside the connector just wore out and the ring blew out and that connector is useless now, worst part is for some reason Amazon will not allow me to do a review on this product and warn people of this problem. This Yotoo hose comes with a more industrial connector and totally different internal seal set up so I am hoping for the best. The 25 feet should be perfect for using on small portable compressor inside the house, that’s what I got the shorter hose for. And comparing it with equal 3/8” x 25’ polyurethane hose at my local big box hardware store which does not even come with couplers on the ends it seems to be an exceptional price. I also acquired Yotoo 100 foot of hose which I would review as the same as above with the exception of loving the length reaches from my barn to any vehicle tire in the driveway without having to roll the compressor out of the barn shop. This is going to be so handy for when I change out snow tires.

[Size: 25 FT, Size: 25 FT]
This is a good hose. I’ve used a lot of pneumatic hoses over the past 30 years—from rubber and hybrid polymers to stiff PVC coils that crack over time—I can say this reinforced polyurethane hose absolutely holds its own.This hose is lightweight yet reinforced so it isn't weak, doesn’t kink, is flexible, and easy to recoil when you’re done using it. The 25-foot length, 3/8" ID, and 9/16" OD make it easy to handle around the shop, the garage, or small home DIY projects.I gave the fittings a solid scratch test and they passed with flying, bright brass colors! The scratches revealed a solid brass underneath with no flaking or plating failure (see picture). The fittings are also non‑magnetic, with the only magnetism coming from the steel bearings inside the female quick‑connect — which is typical from real brass alloy hardware. The fittings come already sealed and torqued so you're ready to use this hose straight out of the box. Also, the bend restrictors lock in over the hex section of the fittings and actually stay put, giving the ends some kink resistance. I would like to say "real kink resistance," but the booties (bend restrictors) are the only part of the hose that aren't well-made. However, the brass end fittings do swivel which helps a lot with end-kinking.Overall, it’s a quality hose with genuine brass alloy fittings, good flexibility, and the kind of handling you want for everyday pneumatic work. At its current price, it’s a fair value considering the reinforced polyurethane build and durable, articulating fittings.

[Size: 25 FT, Size: 25 FT]
This is a well constructed air hose with nice standard air fittings on the ends. It's long enough to reach all the tires on my car without moving the compressor. When connected to my compressor and air tools, none of the joints leaked any air. The end fittings have rotating joints but I'm not sure they add much to how the hose works because mated air fittings can rotate anyway and the joints are a little stiff under air pressure. The hose is described as flexible but it definitely wants to stay coiled as you can see in the attached pictures. The black rubber strain reliefs at the ends add some protection to the hose end connections but they can easily slide down the hose. The description says the hose has a maximum working pressure of 300PSI but the hose itself, as seen in the attached picture, says not to exceed 200PSI. Overall, it's a decent hose.

[Size: 25 FT, Size: 25 FT]
This YOTOO air hose is a practical option for anyone who wants something lighter and easier to handle than a traditional rubber hose. The 25-foot length provides a useful amount of reach for garage projects, finish work, and other jobs around the house without leaving a huge amount of extra hose to manage.The reinforced polyurethane construction is a nice balance between flexibility and durability. It is designed to resist abrasion while being less likely to damage painted surfaces, flooring, trim, or cabinets. That makes it especially appealing for indoor work where dragging a heavy rubber hose around can be annoying.Another useful detail is that the 1/4-inch industrial quick coupler and plug are already installed. There is no need to purchase basic fittings separately, so it can connect directly to a compatible compressor and air tool. The swivel coupler should also help keep the hose from twisting as much during use.The bend restrictors at both ends are a welcome addition. Hose connections tend to take the most abuse, especially when the hose is pulled at an angle or stored carelessly. The restrictors add some support in those areas and should help reduce sharp bends and kinks.With a 3/8-inch inner diameter and a listed working pressure of up to 300 PSI, it should be suitable for a wide range of common pneumatic tools. The broad temperature rating is another plus for anyone working in a cold garage or dealing with warmer outdoor conditions.Overall, this looks like a well-equipped air hose for the price. The included fittings, manageable 25-foot length, lightweight material, reinforced construction, and two-year warranty make it a convenient package without requiring extra parts right away.

[Size: 50 FT, Size: 50 FT]
Reviewing the Yotoo reinforced polyurethane air hose in the 50ft length.This item arrived at my location in great shape and perfect working order.I am setting up a new work space and mancave on my property and an needing some extra items for this space. I already have a large compressor and rubber air hoses for use on that unit. But in setting up the secondary work space I am buying a small compressor and associated tools. For that reason I was wanting a lighter weight and thinner air hose to handle work in this 10x12ft space.The first thing I like about this hose is that it is much lighter weight than my rubber air hoses. It has, like the heavier hoses, bend and kink restrictors on each end. These keep your hose in great shape and avoid setting permanent kinks in the line. Each end has a good quality air coupler already installed which is convenient.I haven't found anything to complain about on this unit.Overall, I am totally satisfied with this item. Other than the cool color, the best part of this hose is the weight. I am very happy with this unit and forsee many years of use in my new workshop.Great item, well made, cool color, light weight....makes for one super happy customer.Highly recommended for anyone needing a light weight and very portable air hose.

[Size: 50 FT, Size: 50 FT]
I've been using 1/4" PU hoses for my air nailers for a while - they are so inexpensive, light and flexible that it's hard to beat. But up to now, I've been a 100% rubber hose user for my 3/8 "main" hoses. Saw this one and decided to give it a try. I'm very optimistic about it due to the reduced bulk and weight.The hose ends are the kind that have an integrated swivel and, although I won't be using them (not my "standard"), the all brass couplers seem to be first rate. Bend restrictors are the usual semi-soft plastic kind that just shift the problem a few inches down the hose. The female coupler is the 6-ball industrial type. Would have been better to be the universal kind. Setting the set aside because it's brass - maybe I'll find a use for it one daySo with the ends swapped out, I pressurized the hose and checked for leaks, especially at the swivels. None. Unwinding the hose, it lays mostly flat, but only after taking care to remove all the twist. However, once pressurized, the hose stiffens up appreciably and becomes unruly. It doesn't lay so flat when stretched out (again, more twists to remove) and is difficult to coil neatly. Release the pressure and it's fine.I'm hoping that leaving it pressurized in the sun for a few hours might help it loosen up a bit. That's what happened with my 1/4" hoses - they became more docile over time.The jury is still out on this hose. For sure it's lighter than rubber, but maybe not as flexible under pressure than I had hoped. Will use it for a few weeks before deciding whether the rubber one or this one goes on the "extra hose" hook.

[Size: 50 FT]
My old air hose was heavy, stiff, and would kink every time I moved it. Dragging it around the garage was a chore and in cold weather it turned into a wrestling match. This polyurethane one is a completely different experiance.Its noticably lighter and it stays flexible even when its cold, which is where rubber hoses get stiff and useless. It coils and uncoils easily and doesnt fight you or hold the shape it was wound in.The kink resistance is the big improvement. Part of that is the material and part of it is the swivel fittings on both ends. Having both ends swivel means the hose doesnt build up twist as you move around with a tool, and thats what causes most kinking in the first place. Theres also bend restrictors where the hose meets the fittings, which is exactly where hoses always fail from repeated flexing.3/8 inch inner diameter gives good airflow. Ran an impact wrench off it doing tires and it kept up with no pressure drop.The quick coupler and plug are already installed so you connect it and go, no fittings to buy or thread. The connections seated tight on my compressor and tools with no leaks.The bright blue is more useful than it sounds. Its easy to spot on a cluttered garage floor so your not tripping over it, and the outer surface is smooth so its not scratching up anything it drags across.50 feet is a good working length for a garage. Solid hose, real improvement over what I had.

[Size: 100 FT, Size: 100 FT]
This one's actually a very high quality hose, it's as lightweight as PVC and about as flexible as rubber or hybrid hoses although It's not quite as tough as a thick solid rubber like a goodyear when it comes to dragging it across the shop floor or driveway it's still very abrasive resistant.Functions just like you'd expect from a quality hose, I've even run some 3/4 and 1/2 aircat and astro Thor high torque impacts on here and kept up fine justlike a 3/8 should.I've got this routed over the joist and dropped down into my woodworking area where my orbital sanders and nailers are and it's been doin great. Tbh the 100ft is abit long for what I need but hey it's better than being too short and the 3/8 size gives ya alot more air volume if I need to run something like an impact or varnish sprayer over there.The fittings are very well made and I like the reinforced ends which should help keep the hose from getting beat up when ya drop it or kinked if you're tuggin hard on it to get a good angle on what you're workin on.One final note, I like the color alot... yessss I know color is color ..but hey what's wrong with something lookin as good as it performs.All in, very good hose so far and doin well with whatever I need air on around the shop.